[PATCH 0/7] Add DSI display support for TI's Jacinto platforms
From: Jayesh Choudhary
Date: Fri Apr 11 2025 - 06:52:14 EST
Hello All,
This series adds the dts support to enable DSI on 3 platforms for TI SoCs:
- J784S4-EVM
- J721S2-EVM
- AM68-SK
This series *depends* upon a couple of driver series[0][1]and a config
patch[2] that enables CDNS_DSI and CDNS_DPHY.
[0]: <https://lore.kernel.org/all/20250402-cdns-dsi-impro-v2-0-4a093eaa5e27@xxxxxxxxxxxxxxxx/>
This series adds cdns-dsi-core fixes
[1]: <https://lore.kernel.org/all/20250411092307.238398-1-j-choudhary@xxxxxx/>
This patch adds the necessary DSI flags that are used in cdns-dsi-core
driver which are propagated from sn65dsi86 bridge.
[2]: <https://lore.kernel.org/all/20250411095043.272488-1-j-choudhary@xxxxxx/>
This patch enables the required configs for DSI.
I have locally tested using kmstest utility on all 3 platforms.
NOTE: For higher resolutions, we need bigger CMA region.
But for validation, the default value is enough.
I am posting another series to add CMA region to Jacinto platforms
similar to Sitara family soon:
<https://lore.kernel.org/all/20240613150902.2173582-1-devarsht@xxxxxx/>
Jayesh Choudhary (5):
arm64: dts: ti: k3-j784s4-j742s2-main-common: add DSI & DSI PHY
arm64: dts: ti: k3-j784s4-j742s2-evm-common: Enable DisplayPort-1
arm64: dts: ti: k3-j721s2-common-proc-board: Add main_i2c4 instance
arm64: dts: ti: k3-j721s2-common-proc-board: Enable DisplayPort-1
arm64: dts: ti: k3-am68-sk: Enable DSI on DisplayPort-0
Rahul T R (2):
arm64: dts: ti: k3-j721s2-main: add DSI & DSI PHY
arm64: dts: ti: k3-j721s2-som-p0: add DSI to eDP
.../boot/dts/ti/k3-am68-sk-base-board.dts | 96 ++++++++++++++
.../dts/ti/k3-j721s2-common-proc-board.dts | 116 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 37 ++++++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 52 ++++++++
.../dts/ti/k3-j784s4-j742s2-evm-common.dtsi | 117 +++++++++++++++++-
.../dts/ti/k3-j784s4-j742s2-main-common.dtsi | 37 ++++++
6 files changed, 454 insertions(+), 1 deletion(-)
--
2.34.1