Re: [PATCH 5/6] ARM: dts: microchip: sama7d65: Add MCP16502 to sama7d65 curiosity

[Claudiu Beznea]

Hi, Ryan,

On 01.04.2025 19:13, Ryan.Wanner@xxxxxxxxxxxxx wrote:
> From: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx>
> 
> Add MCP16502 to the sama7d65_curiosity board to control voltages in the
> MPU. The device is connected to twi 10 interface
> 
> Signed-off-by: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx>
> ---
>  .../dts/microchip/at91-sama7d65_curiosity.dts | 135 ++++++++++++++++++
>  1 file changed, 135 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> index 441370dbb4c2..81abc387112d 100644
> --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> @@ -30,6 +30,15 @@ memory@60000000 {
>  		device_type = "memory";
>  		reg = <0x60000000 0x40000000>;
>  	};
> +
> +	reg_5v: regulator-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "5V_MAIN";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
> +
>  };
>  
>  &dma0 {
> @@ -99,6 +108,132 @@ channel@4 {
>  			label = "VDDCPU";
>  		};
>  	};
> +
> +	pmic@5b {
> +		compatible = "microchip,mcp16502";
> +		reg = <0x5b>;
> +		lvin-supply = <&reg_5v>;
> +		pvin1-supply = <&reg_5v>;
> +		pvin2-supply = <&reg_5v>;
> +		pvin3-supply = <&reg_5v>;
> +		pvin4-supply = <&reg_5v>;
> +		status = "okay";
> +
> +		regulators {
> +			vdd_3v3: VDD_IO {
> +				regulator-name = "VDD_IO";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-initial-mode = <2>;
> +				regulator-allowed-modes = <2>, <4>;
> +				regulator-always-on;
> +
> +				regulator-state-standby {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +					regulator-mode = <4>;
> +				};
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-mode = <4>;
> +				};
> +			};
> +
> +			vddioddr: VDD_DDR {
> +				regulator-name = "VDD_DDR";
> +				regulator-min-microvolt = <1350000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-initial-mode = <2>;
> +				regulator-allowed-modes = <2>, <4>;
> +				regulator-always-on;
> +
> +				regulator-state-standby {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1350000>;
> +					regulator-mode = <4>;
> +				};
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1350000>;
> +					regulator-mode = <4>;
> +				};
> +			};
> +
> +			vddcore: VDD_CORE {
> +				regulator-name = "VDD_CORE";
> +				regulator-min-microvolt = <1050000>;
> +				regulator-max-microvolt = <1050000>;
> +				regulator-initial-mode = <2>;
> +				regulator-allowed-modes = <2>, <4>;
> +				regulator-always-on;
> +
> +				regulator-state-standby {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1050000>;
> +					regulator-mode = <4>;
> +				};
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-mode = <4>;
> +				};
> +			};
> +
> +			vddcpu: VDD_OTHER {
> +				regulator-name = "VDD_OTHER";
> +				regulator-min-microvolt = <1050000>;
> +				regulator-max-microvolt = <1250000>;
> +				regulator-initial-mode = <2>;
> +				regulator-allowed-modes = <2>, <4>;
> +				regulator-ramp-delay = <3125>;
> +				regulator-always-on;
> +
> +				regulator-state-standby {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1050000>;
> +					regulator-mode = <4>;
> +				};
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-mode = <4>;
> +				};
> +			};
> +
> +			vldo1: LDO1 {
> +				regulator-name = "LDO1";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +
> +				regulator-state-standby {
> +					regulator-suspend-microvolt = <1800000>;
> +					regulator-on-in-suspend;
> +				};
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vldo2: LDO2 {
> +				regulator-name = "LDO2";
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <3700000>;
> +
> +				regulator-state-standby {
> +					regulator-suspend-microvolt = <1800000>;

I can't find the schematics for this board. Is there a reason for keeping
this @1.8V in suspend?

Thank you,
Claudiu

> +					regulator-on-in-suspend;
> +				};
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +		};
> +	};
>  };
>  
>  &main_xtal {