Re: [PATCH v4 1/2] dt-bindings: iio: imu: icm42600: add interrupt naming support

From: Conor Dooley
Date: Fri Apr 11 2025 - 12:24:37 EST


On Thu, Apr 10, 2025 at 05:39:40PM +0200, Jean-Baptiste Maneyrol via B4 Relay wrote:
> From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@xxxxxxx>
>
> Add interrupt-names field for specifying interrupt pin configured.
>
> Chips are supporting up to 2 interrupt pins with configurable interrupt
> sources. Change interrupt to support 1 or 2 entries.
>
> Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@xxxxxxx>

Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

> ---
> .../devicetree/bindings/iio/imu/invensense,icm42600.yaml | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
> index 7e4492bbd0278a336587dc5ac04da7153453da29..d4d4e5c3d8562523872a737864610c26c8fccd82 100644
> --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
> +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
> @@ -39,7 +39,16 @@ properties:
> maxItems: 1
>
> interrupts:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
> +
> + interrupt-names:
> + minItems: 1
> + maxItems: 2
> + items:
> + enum:
> + - INT1
> + - INT2
>
> drive-open-drain:
> type: boolean
> @@ -76,6 +85,7 @@ examples:
> reg = <0x68>;
> interrupt-parent = <&gpio2>;
> interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-names = "INT1";
> vdd-supply = <&vdd>;
> vddio-supply = <&vddio>;
> };
> @@ -95,6 +105,7 @@ examples:
> spi-cpol;
> interrupt-parent = <&gpio1>;
> interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-names = "INT1";
> vdd-supply = <&vdd>;
> vddio-supply = <&vddio>;
> };
>
> --
> 2.49.0
>
>

Attachment: signature.asc
Description: PGP signature