Re: [PATCH v1 2/2] arm64: dts: qcom: Enable TSENS support for QCS615 SoC

[Konrad Dybcio]

On 4/10/25 4:00 PM, Gaurav Kohli wrote:
> Add TSENS and thermal devicetree node for QCS615 SoC.
> 
> Signed-off-by: Gaurav Kohli <quic_gkohli@xxxxxxxxxxx>
> ---

subject: "arm64: dts: qcom: qcs615: ..">  arch/arm64/boot/dts/qcom/qcs615.dtsi | 281 +++++++++++++++++++++++++++
>  1 file changed, 281 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> index edfb796d8dd3..f0d8aed7da29 100644
> --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> @@ -3668,6 +3668,17 @@ usb_2_dwc3: usb@a800000 {
>  				maximum-speed = "high-speed";
>  			};
>  		};
> +
> +		tsens0: tsens@c222000 {
> +			compatible = "qcom,qcs615-tsens", "qcom,tsens-v2";
> +			reg = <0x0 0xc263000 0x0 0x1ff>,
> +				<0x0 0xc222000 0x0 0x8>;
Pad the address part to 8 hex digits with leading zeroes> +			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,

&pdc 26

> +					<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;

&pdc 28

Please align the <s

> +			#qcom,sensors = <16>;
> +			interrupt-names = "uplow", "critical";

it would make sense for interrupt-names to come right under interrupts
> +			#thermal-sensor-cells = <1>;
> +		};
>  	};
>  
>  	arch_timer: timer {
> @@ -3677,4 +3688,274 @@ arch_timer: timer {
>  			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>  			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>  	};
> +
> +	thermal-zones {
> +		aoss-thermal {
> +			thermal-sensors = <&tsens0 0>;
> +
> +			trips {
> +
> +				trip-point0 {
> +					temperature = <110000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpuss-0-thermal {
> +			thermal-sensors = <&tsens0 1>;
> +
> +			trips {
> +
> +				trip-point0 {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				trip-point1 {
> +					temperature = <118000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};

Please drop the passive trip point for the *CPU* tzones, see

commit 06eadce936971dd11279e53b6dfb151804137836
("arm64: dts: qcom: x1e80100: Drop unused passive thermal trip points for CPU")

and add a single critical point instead, see

commit 03f2b8eed73418269a158ccebad5d8d8f2f6daa1
("arm64: dts: qcom: x1e80100: Apply consistent critical thermal shutdown")

Konrad