[PATCH v4 05/10] phy: phy-snps-eusb2: split phy init code

[Ivaylo Ivanov]

The current phy init consists of hardware power-up, as well as
QCOM-specific eUSB2 init code. Split it into two parts, to make room
for such non-QCOM init code.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
---
 drivers/phy/phy-snps-eusb2.c | 94 +++++++++++++++++++++++-------------
 1 file changed, 61 insertions(+), 33 deletions(-)

diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c
index e1b175f48..1933e8440 100644
--- a/drivers/phy/phy-snps-eusb2.c
+++ b/drivers/phy/phy-snps-eusb2.c
@@ -121,6 +121,10 @@ static const char * const eusb2_hsphy_vreg_names[] = {
 
 #define EUSB2_NUM_VREGS		ARRAY_SIZE(eusb2_hsphy_vreg_names)
 
+struct snps_eusb2_phy_drvdata {
+	int (*phy_init)(struct phy *p);
+};
+
 struct snps_eusb2_hsphy {
 	struct phy *phy;
 	void __iomem *base;
@@ -133,6 +137,8 @@ struct snps_eusb2_hsphy {
 	enum phy_mode mode;
 
 	struct phy *repeater;
+
+	const struct snps_eusb2_phy_drvdata *data;
 };
 
 static int snps_eusb2_hsphy_set_mode(struct phy *p, enum phy_mode mode, int submode)
@@ -230,41 +236,11 @@ static int qcom_eusb2_ref_clk_init(struct snps_eusb2_hsphy *phy)
 	return 0;
 }
 
-static int snps_eusb2_hsphy_init(struct phy *p)
+static int qcom_snps_eusb2_hsphy_init(struct phy *p)
 {
 	struct snps_eusb2_hsphy *phy = phy_get_drvdata(p);
 	int ret;
 
-	ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs);
-	if (ret)
-		return ret;
-
-	ret = phy_init(phy->repeater);
-	if (ret) {
-		dev_err(&p->dev, "repeater init failed. %d\n", ret);
-		goto disable_vreg;
-	}
-
-	ret = clk_prepare_enable(phy->ref_clk);
-	if (ret) {
-		dev_err(&p->dev, "failed to enable ref clock, %d\n", ret);
-		goto disable_vreg;
-	}
-
-	ret = reset_control_assert(phy->phy_reset);
-	if (ret) {
-		dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret);
-		goto disable_ref_clk;
-	}
-
-	usleep_range(100, 150);
-
-	ret = reset_control_deassert(phy->phy_reset);
-	if (ret) {
-		dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret);
-		goto disable_ref_clk;
-	}
-
 	snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG0,
 				    CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN);
 
@@ -334,6 +310,52 @@ static int snps_eusb2_hsphy_init(struct phy *p)
 				    USB2_SUSPEND_N_SEL, 0);
 
 	return 0;
+}
+
+static const struct snps_eusb2_phy_drvdata sm8550_snps_eusb2_phy = {
+	.phy_init	= qcom_snps_eusb2_hsphy_init,
+};
+
+static int snps_eusb2_hsphy_init(struct phy *p)
+{
+	struct snps_eusb2_hsphy *phy = phy_get_drvdata(p);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs);
+	if (ret)
+		return ret;
+
+	ret = phy_init(phy->repeater);
+	if (ret) {
+		dev_err(&p->dev, "repeater init failed. %d\n", ret);
+		goto disable_vreg;
+	}
+
+	ret = clk_prepare_enable(phy->ref_clk);
+	if (ret) {
+		dev_err(&p->dev, "failed to enable ref clock, %d\n", ret);
+		goto disable_vreg;
+	}
+
+	ret = reset_control_assert(phy->phy_reset);
+	if (ret) {
+		dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret);
+		goto disable_ref_clk;
+	}
+
+	usleep_range(100, 150);
+
+	ret = reset_control_deassert(phy->phy_reset);
+	if (ret) {
+		dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret);
+		goto disable_ref_clk;
+	}
+
+	ret = phy->data->phy_init(p);
+	if (ret)
+		goto disable_ref_clk;
+
+	return 0;
 
 disable_ref_clk:
 	clk_disable_unprepare(phy->ref_clk);
@@ -378,6 +400,10 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;
 
+	phy->data = device_get_match_data(dev);
+	if (!phy->data)
+		return -EINVAL;
+
 	phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->base))
 		return PTR_ERR(phy->base);
@@ -424,8 +450,10 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id snps_eusb2_hsphy_of_match_table[] = {
-	{ .compatible = "qcom,sm8550-snps-eusb2-phy", },
-	{ },
+	{
+		.compatible = "qcom,sm8550-snps-eusb2-phy",
+		.data = &sm8550_snps_eusb2_phy,
+	}, { },
 };
 MODULE_DEVICE_TABLE(of, snps_eusb2_hsphy_of_match_table);
 
-- 
2.43.0