Re: [PATCH] USB: serial: option: Add Sierra Wireless EM9291

[Johan Hovold]

On Fri, Apr 11, 2025 at 10:05:38AM -0700, Adam Xue wrote:
> Add Sierra Wireless EM9291.
> 
> Interface 0: MBIM control
> 	  1: MBIM data
> 	  3: AT port
>           4: Diagnostic port
> 
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
> D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=1199 ProdID=90e3 Rev=00.06
> S:  Manufacturer=Sierra Wireless, Incorporated
> S:  Product=Sierra Wireless EM9291
> S:  SerialNumber=xxxxxxxxxxxxxxxx
> C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
> E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
> E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
> I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> 
> Signed-off-by: Adam Xue <zxue@xxxxxxxxxxx>
> ---

Thanks for the update.

In the future, when you revise patches remember to include the version
number in Subject (e.g. "[PATCH v2] USB: ...") and also a short
changelog here below the --- line (so that it does not end up in the
commit message).
 
>  /* UNISOC (Spreadtrum) products */
>  #define UNISOC_VENDOR_ID			0x1782
> @@ -2432,6 +2433,9 @@ static const struct usb_device_id option_ids[] = {
>  	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
> +	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9291, 0xff, 0xff, 0x30) },
> +	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9291, 0xff, 0xff, 0x40) },

> +	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9291, 0xff, 0, 0) },

Why do you need this third entry?

>  	{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) },
>  	{ USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0530, 0xff),			/* TCL IK512 MBIM */

Johan