Re: [PATCH v2 00/12] Add support for Renesas RZ/V2N SoC and EVK

[Lad, Prabhakar]

Hi Geert,

Thank you for the review.

On Mon, Apr 7, 2025 at 8:16 PM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
>
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> This patch series adds initial support for the Renesas RZ/V2N (R9A09G056)
> SoC and its evaluation board (EVK). The Renesas RZ/V2N is a vision AI
> microprocessor (MPU) designed for power-efficient AI inference and
> real-time vision processing. It features Renesas' proprietary AI
> accelerator (DRP-AI3), delivering up to 15 TOPS AI performance, making
> it ideal for applications such as Driver Monitoring Systems (DMS),
> industrial monitoring cameras, and mobile robots.
>
> Key features of the RZ/V2N SoC:
>   Processing Power:
>     - Quad Arm Cortex-A55 cores at 1.8GHz for high-performance computing
>     - Single Arm Cortex-M33 core at 200MHz for real-time processing
>     - 1.5MB on-chip SRAM for fast data access
>     - LPDDR4/LPDDR4X memory interface for high-speed RAM access
>
>   AI and Vision Processing:
>     - DRP-AI3 accelerator for low-power, high-efficiency AI inference
>     - Arm Mali-C55 ISP (optional) for image signal processing
>     - Dual MIPI CSI-2 camera interfaces for multi-camera support
>
>   High-Speed Interfaces:
>     - PCIe Gen3 (2-lane) 1ch for external device expansion
>     - USB 3.2 (Gen2) 1ch (Host-only) for high-speed data transfer
>     - USB 2.0 (Host/Function) 1ch for legacy connectivity
>     - Gigabit Ethernet (2 channels) for network communication
>
>   Industrial and Automotive Features:
>     - 6x CAN FD channels for automotive and industrial networking
>     - 24-channel ADC for sensor data acquisition
>
> LINK: https://tinyurl.com/renesas-rz-v2n-soc
>
> The series introduces:
> - Device tree bindings for various subsystems (SYS, SCIF, SDHI, CPG, pinctrl).
> - RZ/V2N SoC identification support.
> - Clock and pinctrl driver updates for RZ/V2N.
> - Initial DTSI and device tree for the RZ/V2N SoC and EVK.
>
> These patches have been tested on the RZ/V2N EVK with v6.15-rc1 kernel,
> logs can be found here:
> https://gist.github.com/prabhakarlad/aa3da7558d007aab8a288550005565d3
>
> @Geert, Ive rebased the patches on top of v6.15-rc1 + renesas-dts-for-v6.16
> + renesas-clk-for-v6.16 branches. Also these patches apply on top of the below
> series [1] and [2]. I had to sort the order in Makefile for patch [3] to
> avoid conflicts.
> [1] https://lore.kernel.org/all/20250401090133.68146-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/
> [2] https://lore.kernel.org/all/20250403212919.1137670-1-thierry.bultel.yh@xxxxxxxxxxxxxx/#t
> [3] https://lore.kernel.org/all/20250403212919.1137670-13-thierry.bultel.yh@xxxxxxxxxxxxxx/
>
> Note, dtbs_check will generate the below warnings this is due to missing
> ICU support as part of initial series. I will be sending a follow-up patch
> series to add ICU support which will fix these warnings.
> arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dtb: pinctrl@10410000 (renesas,r9a09g056-pinctrl): 'interrupt-controller' is a required property
>         from schema $id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
> arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dtb: pinctrl@10410000 (renesas,r9a09g056-pinctrl): '#interrupt-cells' is a required property
>         from schema $id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
>
> v1->v2:
> - Added acks from Rob.
> - Squashed the RZ/V2N EVK and SoC variant documentation into a single
>   commit.
> - Updated the commit messages.
> - Added RZV2N_Px, RZV2N_PORT_PINMUX, and RZV2N_GPIO macros in
>   SoC DTSI as we are re-using renesas,r9a09g057-pinctrl.h
>   in pictrl driver hence to keep the consistency with the
>   RZ/V2H(P) SoC these macros are added.
> - Dropped `renesas,r9a09g056-pinctrl.h` header file.
> - Followed DTS coding style guidelines
> - Dropped defconfig changes from the series.
> - Dropped SDHI dt-binding patch as its already applied to mmc -next tree.
>
> Cheers,
> Prabhakar
>
> Lad Prabhakar (12):
>   dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and
>     EVK
>   soc: renesas: Add config option for RZ/V2N (R9A09G056) SoC
>   dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC
>   soc: renesas: sysc: Add SoC identification for RZ/V2N SoC
>   dt-bindings: serial: renesas: Document RZ/V2N SCIF
>   dt-bindings: clock: renesas: Document RZ/V2N SoC CPG
>   clk: renesas: rzv2h-cpg: Sort compatible list based on SoC part number
>   clk: renesas: rzv2h: Add support for RZ/V2N SoC
>   dt-bindings: pinctrl: renesas: Document RZ/V2N SoC
>   pinctrl: renesas: rzg2l: Add support for RZ/V2N SoC
>   arm64: dts: renesas: Add initial SoC DTSI for RZ/V2N
>   arm64: dts: renesas: Add initial device tree for RZ/V2N EVK
>
Would it be OK if I send version 3 containing only patches 4/12 and 10/12?

Cheers,
Prabhakar