[PATCH v5 0/5] leds: add new LED driver for TI LP5812

[Nam Tran]

This patch series adds support for the TI/National Semiconductor LP5812
4x3 matrix RGB LED driver. The driver supports features such as autonomous
animation and time-cross-multiplexing (TCM) for dynamic LED effects.

Signed-off-by: Nam Tran <trannamatk@xxxxxxxxx>
---
Changes in v5:
- Rebase on v6.15-rc2
- Removed unused functions (lp5812_dump_regs, lp5812_update_bit).
- Address Krzysztof's review comments
- Link to v4: https://lore.kernel.org/linux-leds/20250405183246.198568-1-trannamatk@xxxxxxxxx/

---
Nam Tran (5):
  dt-bindings: leds: add TI/National Semiconductor LP5812 LED Driver
  leds: add TI/National Semiconductor LP5812 LED Driver
  docs: ABI: Document LP5812 LED sysfs interfaces
  docs: leds: Document TI LP5812 LED driver
  arm64: dts: Add LP5812 LED node for Raspberry Pi 4 Model B

 .../ABI/testing/sysfs-bus-i2c-devices-lp5812  |  144 +
 .../devicetree/bindings/leds/ti,lp5812.yaml   |  119 +
 Documentation/leds/leds-lp5812.rst            |   79 +
 MAINTAINERS                                   |   12 +
 .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts |   60 +
 drivers/leds/Kconfig                          |   16 +
 drivers/leds/Makefile                         |    1 +
 drivers/leds/leds-lp5812.c                    | 2797 +++++++++++++++++
 drivers/leds/leds-lp5812.h                    |  350 +++
 9 files changed, 3578 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-lp5812
 create mode 100644 Documentation/devicetree/bindings/leds/ti,lp5812.yaml
 create mode 100644 Documentation/leds/leds-lp5812.rst
 create mode 100644 drivers/leds/leds-lp5812.c
 create mode 100644 drivers/leds/leds-lp5812.h


base-commit: 8ffd015db85fea3e15a77027fda6c02ced4d2444
-- 
2.25.1