Re: [PATCH net-next v5 3/3] net: stmmac: Add DWMAC glue layer for Renesas GBETH

[Russell King (Oracle)]

On Mon, Apr 07, 2025 at 01:03:17PM +0100, Prabhakar wrote:
> +	gbeth->rstc = devm_reset_control_get_exclusive(dev, NULL);
> +	if (IS_ERR(gbeth->rstc))
> +		return PTR_ERR(gbeth->rstc);
> +
> +	gbeth->dev = dev;
> +	gbeth->regs = stmmac_res.addr;
> +	gbeth->plat_dat = plat_dat;
> +	plat_dat->bsp_priv = gbeth;
> +	plat_dat->set_clk_tx_rate = stmmac_set_clk_tx_rate;
> +	plat_dat->clks_config = renesas_gbeth_clks_config;
> +	plat_dat->flags |= STMMAC_FLAG_HWTSTAMP_CORRECT_LATENCY |
> +			   STMMAC_FLAG_EN_TX_LPI_CLK_PHY_CAP |
> +			   STMMAC_FLAG_SPH_DISABLE;
> +
> +	err = renesas_gbeth_clks_config(gbeth, true);
> +	if (err)
> +		return err;
> +
> +	err = stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
> +	if (err)
> +		renesas_gbeth_clks_config(gbeth, false);
> +
> +	return err;
> +}
> +
> +static void renesas_gbeth_remove(struct platform_device *pdev)
> +{
> +	stmmac_dvr_remove(&pdev->dev);
> +
> +	renesas_gbeth_clks_config(get_stmmac_bsp_priv(&pdev->dev), false);
> +}

Would calling renesas_gbeth_clks_config() in the suspend/resume paths
cause problems?

If not, please consider using plat_dat->init() and plat_dat->exit()
to control these clocks, and then use devm_stmmac_pltfr_probe()
which will call the ->init and ->exit functions around the probe
as necessary and at removal time (and you won't need the remove
method.)

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!