Re: [PATCH net-next 4/4] checkpatch: check for comment explaining rgmii(|-rxid|-txid) PHY modes

[Andrew Lunn]

> +  **UNCOMMENTED_RGMII_MODE**
> +    Historially, the RGMII PHY modes specified in Device Trees have been
> +    used inconsistently, often referring to the usage of delays on the PHY
> +    side rather than describing the board.
> +
> +    PHY modes "rgmii", "rgmii-rxid" and "rgmii-txid" modes require the clock
> +    signal to be delayed on the PCB; this unusual configuration should be
> +    described in a comment. If they are not (meaning that the delay is realized
> +    internally in the MAC or PHY), "rgmii-id" is the correct PHY mode.

It is unclear to me how much ctx_has_comment() will return. Maybe
include an example here of how it should look. I'm assuming:

/* RGMII delays added via PCB traces */
&enet2 {
    phy-mode = "rgmii";
    status = "okay";

fails, but

&enet2 {
    /* RGMII delays added via PCB traces */
    phy-mode = "rgmii";
    status = "okay";

passes?

>  
>  Commit message
>  --------------
> diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
> index 784912f570e9d..57fcbd4b63ede 100755
> --- a/scripts/checkpatch.pl
> +++ b/scripts/checkpatch.pl
> @@ -3735,6 +3735,17 @@ sub process {
>  			}
>  		}
>  
> +# Check for RGMII phy-mode with delay on PCB
> +		if ($realfile =~ /\.dtsi?$/ && $line =~ /^\+\s*(phy-mode|phy-connection-type)\s*=\s*"/ &&

I don't grok perl. Is this only looking a dtsi files? .dts files
should also be checked.

Thanks for working on this, it will be very useful.

	Andrew