[PATCH 7/8] arm64: dts: qcom: apq8039-t2: Move customized pinctrl to board

[Stephan Gerhold]

Prepare for removing the generic UART pinctrl templates from msm8939.dtsi
by copying the definition for the 4 pin UART1 instance into apq8039-t2.dts
and apply the override to limit it to 2 pins. Having it defined separately
in the board DT file makes it clear that the set of pins/pull etc are
specific to the board and UART use case.

No functional change.

Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/apq8039-t2.dts | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
index 4aa0ad19bc0f7fde6f5f3a93cdb6be19fb4f1f65..38c281f0fe65ccfc49de70eaef2a970323ecebc8 100644
--- a/arch/arm64/boot/dts/qcom/apq8039-t2.dts
+++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
@@ -122,14 +122,6 @@ &blsp_uart1 {
 	status = "okay";
 };
 
-&blsp_uart1_default {
-	pins = "gpio0", "gpio1";
-};
-
-&blsp_uart1_sleep {
-	pins = "gpio0", "gpio1";
-};
-
 &blsp_uart2 {
 	pinctrl-0 = <&blsp_uart2_console_default>;
 	pinctrl-1 = <&blsp_uart2_console_sleep>;
@@ -329,6 +321,20 @@ &tlmm {
 		"USBC_GPIO7_1V8",	/* GPIO_120 */
 		"NC";
 
+	blsp_uart1_default: blsp-uart1-default-state {
+		pins = "gpio0", "gpio1";
+		function = "blsp_uart1";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	blsp_uart1_sleep: blsp-uart1-sleep-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	pinctrl_backlight: backlight-state {
 		pins = "gpio98";
 		function = "gpio";

-- 
2.47.2