Re: [PATCH v4 0/7] Convert inno hdmi to drm bridge

[Heiko Stübner]

Hi Alex,

Am Dienstag, 22. April 2025, 09:04:39 Mitteleuropäische Sommerzeit schrieb Andy Yan:
> From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
> 
> When preparing to convert the current inno hdmi driver into a
> bridge driver, I found that there are several issues currently
> existing with it:
> 
> 1. When the system starts up, the first time it reads the EDID, it
>    will fail. This is because RK3036 HDMI DDC bus requires it's PHY's
>    reference clock to be enabled first before normal DDC communication
>    can be carried out.
> 
> 2. The signal is unstable. When running the glmark2 test on the screen,
>    there is a small probability of seeing some screen flickering.
>    This is because The HSYNC/VSYNC polarity of rk3036 HDMI are controlled
>    by GRF. This part is missing in the current driver.
> 
> PATCH 1~6 are try to Fix Document in the dt-binding, then add the
> missing part in driver and dts.
> PATCH 7 converts the curren driver to drm bridge mode.

this looks all pretty okay to me, but could you check that your rk3128
keeps working and maybe provide a Tested-by?

Thanks a lot
Heiko