Re: [PATCH] arm64: tegra: Remove otg id gpio from Jetson TX2 NX

[Aaron Kling]

On Mon, Jun 30, 2025 at 2:27 PM Aaron Kling <webgeek1234@xxxxxxxxx> wrote:
>
> On Wed, May 28, 2025 at 12:42 PM Aaron Kling <webgeek1234@xxxxxxxxx> wrote:
> >
> > On Tue, May 13, 2025 at 4:10 PM Aaron Kling via B4 Relay
> > <devnull+webgeek1234.gmail.com@xxxxxxxxxx> wrote:
> > >
> > > From: Aaron Kling <webgeek1234@xxxxxxxxx>
> > >
> > > The p3509 carrier board does not connect the id gpio. Prior to this, the
> > > gpio role switch driver could not detect the mode of the otg port.
> > >
> > > Signed-off-by: Aaron Kling <webgeek1234@xxxxxxxxx>
> > > ---
> > >  arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts | 1 -
> > >  1 file changed, 1 deletion(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
> > > index 26f71651933d1d8ef32bbd1645cac1820bd2e104..81f204e456409df355bbcb691ef99b0d0c9d504e 100644
> > > --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
> > > +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
> > > @@ -669,7 +669,6 @@ connector {
> > >                                         vbus-gpios = <&gpio
> > >                                                       TEGRA186_MAIN_GPIO(L, 4)
> > >                                                       GPIO_ACTIVE_LOW>;
> > > -                                       id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
> > >                                 };
> > >                         };
> > >
> > >
> > > ---
> > > base-commit: 405e6c37c89ef0df2bfc7a988820a3df22dacb1b
> > > change-id: 20250513-tx2nx-role-switch-37ec55d25189
> > >
> > > Best regards,
> > > --
> > > Aaron Kling <webgeek1234@xxxxxxxxx>
> > >
> > >
> >
> > Friendly reminder about this patch.
>
> Re-reminder about this patch.

Yet another reminder about this patch. It's been over two months
without a response and many other patches have been pulled in the
meantime.

Aaron