[PATCH 6/6] ARM: dts: r9a06g032: Add support for GPIO interrupts

[Herve Codina]

In the RZ/N1 SoC, the GPIO interrupts are multiplexed using the GPIO
Interrupt Multiplexer.

Add the multiplexer node and connect GPIO interrupt lines to the
multiplexer.

The interrupt-map available in the multiplexer node has to be updated in
dts files depending on the GPIO usage. Indeed, the usage of an interrupt
for a GPIO is board dependent.

Up to 8 GPIOs can be used as an interrupt line (one per multiplexer
output interrupt).

Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>
---
 arch/arm/boot/dts/renesas/r9a06g032.dtsi | 45 ++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 7f71c01af409..0e2e0fe92cd3 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -535,6 +535,14 @@ gpio0a: gpio@0 {
 				#gpio-cells = <2>;
 				snps,nr-gpios = <32>;
 				reg = <0>;
+
+				interrupt-controller;
+				interrupt-parent = <&gpioirqmux>;
+				interrupts = < 0  1  2  3  4  5  6  7
+					       8  9 10 11 12 13 14 15
+					      16 17 18 19 20 21 22 23
+					      24 25 26 27 28 29 30 31 >;
+				#interrupt-cells = <2>;
 			};
 
 			/* GPIO0b[0..1]   connected to pins GPIO1..2   */
@@ -579,6 +587,14 @@ gpio1a: gpio@0 {
 				#gpio-cells = <2>;
 				snps,nr-gpios = <32>;
 				reg = <0>;
+
+				interrupt-controller;
+				interrupt-parent = <&gpioirqmux>;
+				interrupts = < 32 33 34 35 36 37 38 39
+					       40 41 42 43 44 45 46 47
+					       48 49 50 51 52 53 54 55
+					       56 57 58 59 60 61 62 63 >;
+				#interrupt-cells = <2>;
 			};
 
 			/* GPIO1b[0..1]   connected to pins GPIO55..56 */
@@ -613,6 +629,14 @@ gpio2a: gpio@0 {
 				#gpio-cells = <2>;
 				snps,nr-gpios = <32>;
 				reg = <0>;
+
+				interrupt-controller;
+				interrupt-parent = <&gpioirqmux>;
+				interrupts = < 64 65 66 67 68 69 70 71
+					       72 73 74 75 76 77 78 79
+					       80 81 82 83 84 85 86 87
+					       88 89 90 91 92 93 94 95 >;
+				#interrupt-cells = <2>;
 			};
 
 			/* GPIO2b[0..9] connected to pins GPIO160..169 */
@@ -626,6 +650,27 @@ gpio2b: gpio@1 {
 			};
 		};
 
+		gpioirqmux: interrupt-controller@51000480 {
+			compatible = "renesas,r9a06g032-gpioirqmux", "renesas,rzn1-gpioirqmux";
+			reg = <0x51000480 0x20>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			interrupt-map-mask = <0x7f>;
+
+			/* interrupt-map has to be updated according to GPIO usage */
+			interrupt-map = <0 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
 		can0: can@52104000 {
 			compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
 			reg = <0x52104000 0x800>;
-- 
2.50.1