[PATCH v3 2/2] iio: pressure: bmp280: Use gpiod_set_value_cansleep()

[Salah Triki]

Switch to `gpiod_set_value_cansleep()`, which is safe to use in
sleepable contexts like the driver probe function.

The `dev_info()` call has been removed as it was considered noisy and
is not necessary for normal driver operation.

Signed-off-by: Salah Triki <salah.triki@xxxxxxxxx>
Reviewed-by: David Lechner <dlechner@xxxxxxxxxxxx>
---
 drivers/iio/pressure/bmp280-core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 6cdc8ed53520..656f6189c84c 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -3217,8 +3217,7 @@ int bmp280_common_probe(struct device *dev,
 		return dev_err_probe(dev, PTR_ERR(gpiod), "failed to get reset GPIO\n");
 
 	/* Deassert the signal */
-	dev_info(dev, "release reset\n");
-	gpiod_set_value(gpiod, 0);
+	gpiod_set_value_cansleep(gpiod, 0);
 
 	data->regmap = regmap;
 
-- 
2.43.0