Re: [PATCH v1 1/2] dt-bindings: HID: i2c-hid: parade: Introduce bindings for Parade tc3408

[Krzysztof Kozlowski]

On Tue, Aug 19, 2025 at 11:48:51AM +0800, Langyan Ye wrote:
> The tc3408 touch screen chip same as Elan eKTH6915 controller
> has a reset gpio. The difference is that they have different
> post_power_delay_ms.
> 
> Signed-off-by: Langyan Ye <yelangyan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>

A nit, subject: drop second/last, redundant "bindings for". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18

Just "Add foo bar"


> ---
>  .../bindings/input/parade,tc3408.yaml         | 72 +++++++++++++++++++
>  1 file changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/parade,tc3408.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/parade,tc3408.yaml b/Documentation/devicetree/bindings/input/parade,tc3408.yaml
> new file mode 100644
> index 000000000000..25db85e90b18
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/parade,tc3408.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/parade,tc3408.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Parade tc3408 touchscreen controller
> +
> +maintainers:
> +  - Langyan Ye <yelangyan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> +
> +description:
> +  Supports the Parade tc3408 touchscreen controller.

Describe the hardware, not what binding supports. You just repeated
title, BTW.

> +  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
> +
> +allOf:
> +  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
> +
> +properties:
> +  compatible:
> +    const: parade,tc3408
> +
> +  reg:
> +    const: 0x24
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  panel: true

Drop

> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: Reset GPIO.

Drop description, redundant.

> +
> +  vcc33-supply:
> +    description: The 3.3V supply to the touchscreen.
> +
> +  vccio-supply:
> +    description: The 1.8V supply to the touchscreen.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - panel
> +  - vcc33-supply
> +  - vccio-supply
> +
> +additionalProperties: false

unevaluatedProperties instead

Best regards,
Krzysztof