[PATCH 0/4] arm64: dts: qcom: x1: Fix swapped USB MP repeaters for boards with 2 ports

[Stephan Gerhold]

The &eusb3_repeater belongs to the first port of the USB MP controller and
the &eusb6_repeater belongs to the second. This is obvious if one looks at
e.g. the CRD or the Dell XPS where only the second port of the USB MP is
used: They only have the &eusb6_repeater and already specify it for the
&usb_mp_hsphy1.

Swap them for the affected boards with 2 ports to set the correct repeater
for each of the USB ports. Boards with just a single port used (CRD, Dell
XPS) are already correct.

Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
---
Stephan Gerhold (4):
      arm64: dts: qcom: x1e001de-devkit: Fix swapped USB MP repeaters
      arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: Fix swapped USB MP repeaters
      arm64: dts: qcom: x1e80100-asus-vivobook-s15: Fix swapped USB MP repeaters
      arm64: dts: qcom: x1e80100-qcp: Fix swapped USB MP repeaters

 arch/arm64/boot/dts/qcom/x1e001de-devkit.dts                | 4 ++--
 arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi | 4 ++--
 arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts     | 4 ++--
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts                   | 4 ++--
 4 files changed, 8 insertions(+), 8 deletions(-)
---
base-commit: 1aa50d938e88fcad1312467bd09be4037bfe68ff
change-id: 20250813-x1e80100-fix-usb-mp-repeaters-3756556463d7

Best regards,
-- 
Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>