Re: [PATCH net-next v4 7/7] net: devmem: allow binding on rx queues with same DMA devices

From: Mina Almasry
Date: Wed Aug 20 2025 - 18:58:53 EST


On Wed, Aug 20, 2025 at 10:14 AM Dragos Tatulea <dtatulea@xxxxxxxxxx> wrote:
>
> Multi-PF netdevs have queues belonging to different PFs which also means
> different DMA devices. This means that the binding on the DMA buffer can
> be done to the incorrect device.
>
> This change allows devmem binding to multiple queues only when the
> queues have the same DMA device. Otherwise an error is returned.
>
> Signed-off-by: Dragos Tatulea <dtatulea@xxxxxxxxxx>
> ---
> net/core/netdev-genl.c | 34 +++++++++++++++++++++++++++++++++-
> 1 file changed, 33 insertions(+), 1 deletion(-)
>
> diff --git a/net/core/netdev-genl.c b/net/core/netdev-genl.c
> index 0df9c159e515..a8c27f636453 100644
> --- a/net/core/netdev-genl.c
> +++ b/net/core/netdev-genl.c
> @@ -906,6 +906,33 @@ static int netdev_nl_read_rxq_bitmap(struct genl_info *info,
> return 0;
> }
>
> +static struct device *netdev_nl_get_dma_dev(struct net_device *netdev,
> + unsigned long *rxq_bitmap,
> + struct netlink_ext_ack *extack)
> +{
> + struct device *dma_dev = NULL;
> + u32 rxq_idx, prev_rxq_idx;
> +
> + for_each_set_bit(rxq_idx, rxq_bitmap, netdev->real_num_rx_queues) {
> + struct device *rxq_dma_dev;
> +
> + rxq_dma_dev = netdev_queue_get_dma_dev(netdev, rxq_idx);
> + /* Multi-PF netdev queues can belong to different DMA devoces.
> + * Block this case.
> + */
> + if (dma_dev && rxq_dma_dev != dma_dev) {
> + NL_SET_ERR_MSG_FMT(extack, "Queue %u has a different dma device than queue %u",
> + rxq_idx, prev_rxq_idx);
> + return ERR_PTR(-EOPNOTSUPP);
> + }
> +
> + dma_dev = rxq_dma_dev;
> + prev_rxq_idx = rxq_idx;
> + }
> +
> + return dma_dev;
> +}
> +
> int netdev_nl_bind_rx_doit(struct sk_buff *skb, struct genl_info *info)
> {
> struct net_devmem_dmabuf_binding *binding;
> @@ -969,7 +996,12 @@ int netdev_nl_bind_rx_doit(struct sk_buff *skb, struct genl_info *info)
> if (err)
> goto err_rxq_bitmap;
>
> - dma_dev = netdev_queue_get_dma_dev(netdev, 0);
> + dma_dev = netdev_nl_get_dma_dev(netdev, rxq_bitmap, info->extack);
> + if (IS_ERR(dma_dev)) {

Does this need to be IS_ERR_OR_NULL? AFAICT if all the ndos return
NULL, then dma_dev will also be NULL, and NULL is not a valid value to
pass to bind_dmabuf below.


--
Thanks,
Mina