Re: [PATCH 0/4] Add cpufreq and USB support for AM62D2

[Paresh Bhagat]

Hi Nishanth and Vignesh,

On 21/08/25 17:57, Nishanth Menon wrote:
> On 14:03-20250820, Paresh Bhagat wrote:
> > This patch series introduces following changes:
> >
> > * Patch 1 fixes the register length in main_pmx/padconfig for AM62D
> >   and AM62A.
> >
> > * Patch 2 enables USB support for AM62D2-EVM by adding pinmux and device
> >   tree nodes.
> >
> > * Patch 3 adds AM62D2 SoC to cpufreq-dt-platdev blacklist so that
> >   cpufreq is handled by the ti-cpufreq driver instead of the
> >   generic cpufreq-dt driver.
> >
> > * Patch 4 extends ti-cpufreq to register AM62D2 SoC support by
> >   reusing the am62a7_soc_data.
> >
> > Boot Logs-
> > https://gist.github.com/paresh-bhagat12/e29d33c3fd92ff17580edf1441ece9f9
> >
> > Tech Ref Manual-https://www.ti.com/lit/pdf/sprujd4
> > Schematics Link-https://www.ti.com/lit/zip/sprcal5
> >
> > Paresh Bhagat (3):
> >    arm64: dts: ti: k3-am62d2-evm: Enable USB support
> >    cpufreq: dt-platdev: Blacklist ti,am62d2 SoC
> >    cpufreq: ti: Add support for AM62D2
> >
> > Vibhore Vardhan (1):
> >    arm64: dts: ti: k3-am62a-main: Fix pinctrl properties
> Please do not mix things up to maintainers. Please post patches #1,2
> separately to DT maintainers - these do not have any relationship with
> the rest of the driver patches.


Thanks for the review. I will keep patches in separate series for 
further set of patches.

> >   arch/arm64/boot/dts/ti/k3-am62a-main.dtsi |  2 +-
> >   arch/arm64/boot/dts/ti/k3-am62d2-evm.dts  | 21 +++++++++++++++++++++
> >   drivers/cpufreq/cpufreq-dt-platdev.c      |  1 +
> >   drivers/cpufreq/ti-cpufreq.c              |  2 ++
> >   4 files changed, 25 insertions(+), 1 deletion(-)
> >
> > --
> > 2.34.1