Re: [PATCH v2 3/5] net: cadence: macb: Add support for Raspberry Pi RP1 ethernet controller

[Claudiu Beznea]

On 22.08.2025 12:34, Stanimir Varbanov wrote:
> From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> 
> The RP1 chip has the Cadence GEM block, but wants the tx_clock
> to always run at 125MHz, in the same way as sama7g5.
> Add the relevant configuration.
> 
> Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxx>
> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

Reviewed-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>