[PATCH] regulator: pm8008: fix probe failure due to negative voltage selector

[Kamal Wadhwa]

In the current design, the `pm8008_regulator_get_voltage_sel()` callback
can return a negative value if the raw voltage value is read as 0 uV from
the PMIC HW register. This can cause the probe to fail when the
`machine_constraints_voltage()` check is called during the regulator
registration flow.

Fix this by using the helper `regulator_map_voltage_linear_range()` to
convert the raw value to a voltage selector inside the mentioned get
voltage selector function. This ensures that the value returned is always
within the defined range.

Signed-off-by: Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>
---
 drivers/regulator/qcom-pm8008-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/qcom-pm8008-regulator.c b/drivers/regulator/qcom-pm8008-regulator.c
index da017c1969d0cc2c6347b68c37518ea8a7ab44a3..90c78ee1c37bf9bf69f43e0bb7798fed94590e95 100644
--- a/drivers/regulator/qcom-pm8008-regulator.c
+++ b/drivers/regulator/qcom-pm8008-regulator.c
@@ -96,7 +96,7 @@ static int pm8008_regulator_get_voltage_sel(struct regulator_dev *rdev)
 
 	uV = le16_to_cpu(val) * 1000;
 
-	return (uV - preg->desc.min_uV) / preg->desc.uV_step;
+	return regulator_map_voltage_linear_range(rdev, uV, INT_MAX);
 }
 
 static const struct regulator_ops pm8008_regulator_ops = {

---
base-commit: b9ddaa95fd283bce7041550ddbbe7e764c477110
change-id: 20250823-pm8008-negitive-selector-71646975befe

Best regards,
-- 
Kamal Wadhwa <quic_kamalw@xxxxxxxxxxx>