[PATCH V5 0/4] Add level shifter support for qualcomm SOC's

From: Sarthak Garg
Date: Wed Sep 03 2025 - 04:04:49 EST


Add level shifter support for qualcomm SOC's.

- Changed from v4
- As suggested by Krzysztof Kozlowski Renamed the property from
`max-sd-hs-frequency` to `max-sd-hs-hz` for clarity.
- As suggested by Krzysztof Kozlowski remove min/max constraints
and add default: 50000000 in dt-bindings.
- As suggested by Konrad Dybcio moved max-sd-hs-hz property in the
SoC dtsi.
- Retained sdhci-caps-mask in sm8550.dtsi for now and will revisit
its removal for future targets after thorough validation and testing
from the beginning.

- Changed from v3
- As suggested by Krzysztof Kozlowski moved the property from the
SoC-level DTS to the board-level DTS.
- Revised the commit messages to clearly explain its board-specific.

- Changed from v2
- As suggested by Konrad Dybcio and Ulf Hansson redesigned logic
to introduce a new DT property max-sd-hs-frequency and override
the hs_max_dtr accordingly in sd.c file.

- Changed from v1
- As suggested by Krzysztof Kozlowski redesigned logic to use
compatible property for adding this level shifter support.
- Addressed Adrian Hunter comments on V1 with resepect to
checkpatch.
- Cleared the bits first and then set bits in
sdhci_msm_execute_tuning as suggested by Adrian Hunter.
- Upated the if condition logic in msm_set_clock_rate_for_bus_mode
as suggested by Adrian Hunter.

Sarthak Garg (4):
mmc: sdhci-msm: Enable tuning for SDR50 mode for SD card
dt-bindings: mmc: controller: Add max-sd-hs-frequency property
mmc: core: Introduce a new flag max-sd-hs-hz
arm64: dts: qcom: sm8550: Add max-sd-hs-hz property

.../bindings/mmc/mmc-controller-common.yaml | 8 ++++++++
arch/arm64/boot/dts/qcom/sm8550.dtsi | 1 +
drivers/mmc/core/host.c | 2 ++
drivers/mmc/core/sd.c | 2 +-
drivers/mmc/host/sdhci-msm.c | 15 +++++++++++++++
include/linux/mmc/host.h | 1 +
6 files changed, 28 insertions(+), 1 deletion(-)

--
2.34.1