[PATCH v3 1/3] dt-bindings: gpio: loongson: Document GPIO controller of LS2K0300 SoC

[Yao Zi]

Loongson-2K0300 ships a GPIO controller whose input/output control logic
is similar to previous generation of SoCs. Additionally, it acts as an
interrupt-controller supporting both level and edge interrupts and has a
distinct reset signal.

Describe its compatible in devicetree. We enlarge the maximum value of
ngpios to 128, since the controller technically supports at most 128
pins, although only 106 are routed out of the package. Properties for
interrupt-controllers and resets are introduced and limited as LS2K0300
only.

Signed-off-by: Yao Zi <ziyao@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Huacai Chen <chenhuacai@xxxxxxxxxxx>
---
 .../bindings/gpio/loongson,ls-gpio.yaml       | 28 ++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
index b68159600e2b..69852444df23 100644
--- a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
@@ -14,6 +14,7 @@ properties:
     oneOf:
       - enum:
           - loongson,ls2k-gpio
+          - loongson,ls2k0300-gpio
           - loongson,ls2k0500-gpio0
           - loongson,ls2k0500-gpio1
           - loongson,ls2k2000-gpio0
@@ -36,7 +37,7 @@ properties:
 
   ngpios:
     minimum: 1
-    maximum: 64
+    maximum: 128
 
   "#gpio-cells":
     const: 2
@@ -49,6 +50,14 @@ properties:
     minItems: 1
     maxItems: 64
 
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -58,6 +67,23 @@ required:
   - gpio-ranges
   - interrupts
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: loongson,ls2k0300-gpio
+    then:
+      required:
+        - "#interrupt-cells"
+        - interrupt-controller
+        - resets
+    else:
+      properties:
+        "#interrupts-cells": false
+        interrupt-controller: false
+        resets: false
+
 additionalProperties: false
 
 examples:
-- 
2.50.1