Re: [PATCH v3 3/3] arm64: dts: ti: k3-pinctrl: Add the remaining macros

[Akashdeep Kaur]

Hi Udit,

On 04/09/25 18:06, Kumar, Udit wrote:
>

...

> > ...
> > > >   #define PULLTYPESEL_SHIFT    (17)
> > > >   #define RXACTIVE_SHIFT        (18)
> > > > +#define DRV_STR_SHIFT           (19)
> > >
> > > referring to above TRM mentioned in commit message
> > >
> > > Bit 20-19 are for DRV_STR, and description says
> > >
> > > 0 - Default
> > > 1 - Reserved
> > > 2 - Reserved
> > > 3 - Reserved
> > >
> > > Not sure, is there some additional document to be referred for 
> > > PIN_DRIVE_STRENGTH
> >
> > This information will be updated in TRM in coming cycles.
>
>
> Sorry ,
>
> can not ack before TRM update

The information can be found at 
https://www.ti.com/lit/ug/spruj83b/spruj83b.pdf in Table 14-8769. 
Description Of The Pad Configuration Register Bit

> > > > +#define DS_ISO_OVERRIDE_SHIFT   (22)
> > > > +#define DS_ISO_BYPASS_EN_SHIFT  (23)

...

> > > >   /* Default mux configuration for gpio-ranges to use with pinctrl */
> > > >   #define PIN_GPIO_RANGE_IOPAD    (PIN_INPUT | 7)
> >
> > Regards,
> > Akashdeep Kaur

Thanks,
Akashdeep Kaur