Re: [PATCH v2 1/2] i2c: qcom-geni: add OPP table support

[Andi Shyti]

Hi Manikanta,

...

> @@ -814,6 +817,24 @@ static int geni_i2c_probe(struct platform_device *pdev)
>  		gi2c->clk_freq_out = I2C_MAX_STANDARD_MODE_FREQ;
>  	}
>  
> +	ret = devm_pm_opp_set_clkname(&pdev->dev, "se");

/&pdev->dev/dev/

> +	if (ret)
> +		return ret;
> +
> +	/* OPP table is optional */
> +	ret = devm_pm_opp_of_add_table(dev);
> +	if (!ret) {
> +		opp = dev_pm_opp_find_freq_floor(dev, &freq);
> +		if (IS_ERR(opp))
> +			return dev_err_probe(dev, PTR_ERR(opp), "failed to find the frequency\n");
> +		dev_pm_opp_put(opp);
> +		ret = dev_pm_opp_set_rate(dev, freq);
> +		if (ret)
> +			return dev_err_probe(dev, ret, "failed to set the rate=%ld\n", freq);

%lu

Thanks,
Andi

> +	} else if (ret && ret != -ENODEV) {