[PATCH 1/3] dt-bindings: spi: spi-cadence: document optional fifo-width DT property

[Jun Guo]

Add documentation for the optional 'fifo-width' device tree property
for the Cadence SPI controller.

Signed-off-by: Jun Guo <jun.guo@xxxxxxxxxxx>
---
 .../devicetree/bindings/spi/spi-cadence.yaml          | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
index 8de96abe9da1..b2e3f217473b 100644
--- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -62,6 +62,17 @@ properties:
     items:
       - const: spi
 
+  fifo-width:
+    description: |
+      This property specifies the FIFO data width (in bits) of the hardware.
+      It must be configured according to the actual FIFO width set during
+      the IP design. For instance, if the hardware FIFO is 32 bits wide,
+      this property should be set to 32.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8
+    maximum: 32
+    default: 8
+
 required:
   - compatible
   - reg
-- 
2.34.1