Re: [PATCH v5 4/7] mailbox: add MediaTek GPUEB IPI mailbox

[Chia-I Wu]

On Mon, Sep 29, 2025 at 12:47 AM Nicolas Frattaroli
<nicolas.frattaroli@xxxxxxxxxxxxx> wrote:
>
> The MT8196 SoC uses an embedded MCU to control frequencies and power of
> the GPU. This controller is referred to as "GPUEB".
>
> It communicates to the application processor, among other ways, through
> a mailbox.
>
> The mailbox exposes one interrupt, which appears to only be fired when a
> response is received, rather than a transaction is completed. For us,
> this means we unfortunately need to poll for txdone.
>
> The mailbox also requires the EB clock to be on when touching any of the
> mailbox registers.
>
> Add a simple driver for it based on the common mailbox framework.
>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@xxxxxxxxxxxxx>
Reviewed-by: Chia-I Wu <olvaffe@xxxxxxxxx>
> ---
>  drivers/mailbox/Kconfig             |  10 ++
>  drivers/mailbox/Makefile            |   2 +
>  drivers/mailbox/mtk-gpueb-mailbox.c | 318 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 330 insertions(+)
[...]
> +static irqreturn_t mtk_gpueb_mbox_thread(int irq, void *data)
> +{
> +       struct mtk_gpueb_mbox_chan *ch = data;
> +       u8 buf[GPUEB_MBOX_MAX_RX_SIZE] = {};
nit: move to inside the if-block below.
> +       int status;
> +
> +       status = atomic_cmpxchg(&ch->rx_status, GPUEB_MBOX_FULL | GPUEB_MBOX_BLOCKED,
> +                               GPUEB_MBOX_FULL);
> +       if (status == (GPUEB_MBOX_FULL | GPUEB_MBOX_BLOCKED)) {
> +               mtk_gpueb_mbox_read_rx(buf, ch);
> +               writel(BIT(ch->num), ch->ebm->mbox_ctl + GPUEB_MBOX_CTL_IRQ_CLR);
> +               mbox_chan_received_data(&ch->ebm->mbox.chans[ch->num], buf);
> +               atomic_set(&ch->rx_status, 0);
> +               return IRQ_HANDLED;
> +       }
> +
> +       return IRQ_NONE;
> +}