Re: [PATCH RESEND 2/2] i2c: tegra: Add Tegra256 support

[Jon Hunter]

Hi Akhil,

On 18/08/2025 05:33, Akhil R wrote:
> Add compatible and the hardware struct for Tegra256. Tegra256 controllers
> use a different parent clock. Hence the timing parameters are different
> from the previous generations to meet the expected frequencies.
>
> Signed-off-by: Akhil R <akhilrajeev@xxxxxxxxxx>
> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
>
> ---
>   drivers/i2c/busses/i2c-tegra.c | 26 ++++++++++++++++++++++++++
>   1 file changed, 26 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 4eb31b913c1a..e533460bccc3 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -1649,7 +1649,33 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
>   	.has_interface_timing_reg = true,
>   };
>   
> +static const struct tegra_i2c_hw_feature tegra256_i2c_hw = {
> +	.has_continue_xfer_support = true,
> +	.has_per_pkt_xfer_complete_irq = true,
> +	.clk_divisor_hs_mode = 7,
> +	.clk_divisor_std_mode = 0x7a,
> +	.clk_divisor_fast_mode = 0x40,
> +	.clk_divisor_fast_plus_mode = 0x19,


Can you check this divisor value? I see we have been using a value of 
0x14 for this which does not align with what we have here. Can you 
confirm if this should be 0x19 or 0x14?

Thanks
Jon

--
nvpublic