[PATCH v1] arm64: dts: qcom: hamoa-iot-evk: Fix 4-speaker playback support

[leqi]

On the HAMOA-IOT-EVK board only 2 out of 4 speakers were functional.
Unlike the CRD, which shares a single GPIO reset line for WSA1/2,
this board provides a dedicated GPIO reset for each WSA, resulting
in 4 separate reset lines.

Update the device tree accordingly so that all 4 speakers can
playback audio as expected.

Signed-off-by: leqi <le.qi@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 30 +++++++++++++++++-----
 1 file changed, 23 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
index df8d6e5c1f45..de9af19be6e8 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -743,7 +743,7 @@ retimer_ss1_con_sbu_out: endpoint {
 };
 
 &lpass_tlmm {
-	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+	spkr0_sd_n_active: spkr0-sd-n-active-state {
 		pins = "gpio12";
 		function = "gpio";
 		drive-strength = <16>;
@@ -751,13 +751,29 @@ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
 		output-low;
 	};
 
-	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+	spkr1_sd_n_active: spkr1-sd-n-active-state {
 		pins = "gpio13";
 		function = "gpio";
 		drive-strength = <16>;
 		bias-disable;
 		output-low;
 	};
+
+	spkr2_sd_n_active: spkr2-sd-n-active-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr3_sd_n_active: spkr3-sd-n-active-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &lpass_vamacro {
@@ -908,7 +924,7 @@ &smb2360_2_eusb2_repeater {
 &swr0 {
 	status = "okay";
 
-	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-0 = <&wsa_swr_active>, <&spkr0_sd_n_active>, <&spkr1_sd_n_active>;
 	pinctrl-names = "default";
 
 	/* WSA8845, Left Woofer */
@@ -927,7 +943,7 @@ left_woofer: speaker@0,0 {
 	left_tweeter: speaker@0,1 {
 		compatible = "sdw20217020400";
 		reg = <0 1>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TweeterLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -961,14 +977,14 @@ wcd_tx: codec@0,3 {
 &swr3 {
 	status = "okay";
 
-	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr2_sd_n_active>, <&spkr3_sd_n_active>;
 	pinctrl-names = "default";
 
 	/* WSA8845, Right Woofer */
 	right_woofer: speaker@0,0 {
 		compatible = "sdw20217020400";
 		reg = <0 0>;
-		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -980,7 +996,7 @@ right_woofer: speaker@0,0 {
 	right_tweeter: speaker@0,1 {
 		compatible = "sdw20217020400";
 		reg = <0 1>;
-		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TweeterRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
-- 
2.34.1