[PATCH v2 1/6] arm64: dts: qcom: qcm6490-shift-otter: Fix sorting and indentation

[Luca Weiss]

From: Alexander Martinz <amartinz@xxxxxxxxxxxxxxx>

Make sure the nodes are sorted correctly, and the indentation is
correct.

Signed-off-by: Alexander Martinz <amartinz@xxxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
index eb8efba1b9dd..8d45e6ac0e44 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
@@ -857,7 +857,7 @@ &uart5 {
 &uart7 {
 	/delete-property/interrupts;
 	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
-			<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
 
 	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
 	pinctrl-names = "default", "sleep";
@@ -920,10 +920,6 @@ &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_dp_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l10c>;
 	vdda18-supply = <&vreg_l1c>;
@@ -950,6 +946,10 @@ &usb_1_qmpphy {
 	status = "okay";
 };
 
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
 &wifi {
 	qcom,calibration-variant = "SHIFTphone_8";
 

-- 
2.51.0