[PATCH 03/32] media: mn88443x: Use %pe format specifier

[Ricardo Ribalda]

The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()

This patch fixes this cocci report:
./dvb-frontends/mn88443x.c:698:3-10: WARNING: Consider using %pe to print PTR_ERR()
./dvb-frontends/mn88443x.c:713:3-10: WARNING: Consider using %pe to print PTR_ERR()

Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
---
 drivers/media/dvb-frontends/mn88443x.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/media/dvb-frontends/mn88443x.c b/drivers/media/dvb-frontends/mn88443x.c
index 7a58f53ab9996031e319711a21b1a8f1c13abed4..818c4e67364c7c6ec2bfc17f21e2cac360f6bfb3 100644
--- a/drivers/media/dvb-frontends/mn88443x.c
+++ b/drivers/media/dvb-frontends/mn88443x.c
@@ -694,8 +694,7 @@ static int mn88443x_probe(struct i2c_client *client)
 
 	chip->mclk = devm_clk_get(dev, "mclk");
 	if (IS_ERR(chip->mclk) && !conf) {
-		dev_err(dev, "Failed to request mclk: %ld\n",
-			PTR_ERR(chip->mclk));
+		dev_err(dev, "Failed to request mclk: %pe\n", chip->mclk);
 		return PTR_ERR(chip->mclk);
 	}
 
@@ -709,8 +708,8 @@ static int mn88443x_probe(struct i2c_client *client)
 	chip->reset_gpio = devm_gpiod_get_optional(dev, "reset",
 						   GPIOD_OUT_HIGH);
 	if (IS_ERR(chip->reset_gpio)) {
-		dev_err(dev, "Failed to request reset_gpio: %ld\n",
-			PTR_ERR(chip->reset_gpio));
+		dev_err(dev, "Failed to request reset_gpio: %pe\n",
+			chip->reset_gpio);
 		return PTR_ERR(chip->reset_gpio);
 	}
 

-- 
2.51.0.760.g7b8bcc2412-goog