Re: [PATCH v2] iio: adc: ad7124: change setup reg allocation strategy

[Andy Shevchenko]

On Tue, Sep 23, 2025 at 04:48:04PM -0500, David Lechner wrote:
> Change the allocation strategy of the 8 SETUP registers from a least-
> recently-used (LRU) to a first-come-first-served basis.
> 
> The AD7124 chips can have up to 16 channels enabled at a time in the
> sequencer for buffered reads, but only have 8 SETUP configurations
> (namely the OFFSET, GAIN, CONFIG and FILTER registers) that must be
> shared among the 16 channels.  This means some of the channels must use
> the exact same configuration parameters so that they can share a single
> SETUP group of registers.  The previous LRU strategy did not keep track
> of how many different configurations were requested at the same time,
> so if there were more than 8 different configurations requested, some
> channels would end up using the incorrect configuration because the slot
> assigned to them would also be assigned to a different configuration
> that wrote over it later.
> 
> Adding such tracking to solve this would make an already complex
> algorithm even more complex.  Instead we can replace it with a simpler
> first-come-first-serve strategy.  This makes it easy to track how many
> different configurations are being requested at the same time.  This
> comes at the expense of slightly longer setup times for buffered reads
> since all setup registers must be written each time when a buffered read
> is enabled.  But this is generally not considered a hot path where
> performance is critical, so should be acceptable.
> 
> This new strategy also makes hardware debugging easier since SETUPs are
> now assigned in a deterministic manner and in a logical order.

...

> +#define AD7124_CFG_SLOT_UNASSIGNED	~0U

Perhaps one of Uxx_MAX should be used instead?

-- 
With Best Regards,
Andy Shevchenko