[PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Use 'edp_hot' function for hpd gpio

[Amit Singh]

Currently, hpd gpio is configured as a general-purpose gpio, which does
not support interrupt generation. This change removes the generic
hpd-gpios property and assigns the edp_hot function to the pin,
enabling proper irq support.

Fixes: 756efb7cb7293 ("arm64: dts: qcom: qcs6490-rb3gen2: Add DP output")
Signed-off-by: Amit Singh <quic_amitsi@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index c146161e4bb4..caa0b6784df3 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -49,8 +49,6 @@ dp-connector {
 		label = "DP";
 		type = "mini";
 
-		hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
-
 		port {
 			dp_connector_in: endpoint {
 				remote-endpoint = <&mdss_edp_out>;
@@ -1420,7 +1418,6 @@ &wifi {
 /* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
 
 &edp_hot_plug_det {
-	function = "gpio";
 	bias-disable;
 };
 
-- 
2.34.1