[PATCH v18 3/6] arm64: dts: qcom: ipq6018: add pwm node

[George Moussalem via B4 Relay]

From: Devi Priya <quic_devipriy@xxxxxxxxxxx>

Describe the PWM block on IPQ6018.

Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Co-developed-by: Baruch Siach <baruch.siach@xxxxxxxxx>
Signed-off-by: Baruch Siach <baruch.siach@xxxxxxxxx>
Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 40f1c262126eff3761430a47472b52d27f961040..7925c9a6b0dcff9e3157dd9de01fbc2d240486a4 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -413,6 +413,16 @@ tcsr: syscon@1937000 {
 			reg = <0x0 0x01937000 0x0 0x21000>;
 		};
 
+		pwm: pwm@1941010 {
+			compatible = "qcom,ipq6018-pwm";
+			reg = <0x0 0x01941010 0x0 0x20>;
+			clocks = <&gcc GCC_ADSS_PWM_CLK>;
+			assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>;
+			assigned-clock-rates = <100000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		usb2: usb@70f8800 {
 			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
 			reg = <0x0 0x070f8800 0x0 0x400>;

-- 
2.51.1