Re: [PATCH v1 1/2] PCI: dw-rockchip: Add remove callback for resource cleanup
From: Shawn Lin
Date: Wed Oct 29 2025 - 02:11:03 EST
在 2025/10/28 星期二 17:34, Anand Moon 写道:
Hi Shawn,
Thanks for your review comments.
On Tue, 28 Oct 2025 at 05:56, Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> wrote:
I feel the rockchip_pcie_phy_deinit will power off the phy
在 2025/10/27 星期一 22:55, Anand Moon 写道:
Introduce a .remove() callback to the Rockchip DesignWare PCIe
controller driver to ensure proper resource deinitialization during
device removal. This includes disabling clocks and deinitializing the
PCIe PHY.
Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-dw-rockchip.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
index 87dd2dd188b4..b878ae8e2b3e 100644
--- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -717,6 +717,16 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
return ret;
}
+static void rockchip_pcie_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rockchip_pcie *rockchip = dev_get_drvdata(dev);
+
+ /* Perform other cleanups as necessary */
+ clk_bulk_disable_unprepare(rockchip->clk_cnt, rockchip->clks);
+ rockchip_pcie_phy_deinit(rockchip);
+}
Thanks for the patch.
Dou you need to call dw_pcie_host_deinit()?
And I think you should also try to mask PCIE_CLIENT_INTR_MASK_MISC andI have implemented resource cleanup in rockchip_pcie_remove,
remove the irq domain as well.
if (rockchip->irq_domain) {
int virq, j;
for (j = 0; j < PCI_NUM_INTX; j++) {
virq = irq_find_mapping(rockchip->irq_domain, j);
if (virq > 0)
irq_dispose_mapping(virq);
}
irq_set_chained_handler_and_data(rockchip->irq, NULL, NULL);
irq_domain_remove(rockchip->irq_domain);
}
which is invoked when the system is shutting down.
Your feedback on the updated code is welcome.
static void rockchip_pcie_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rockchip_pcie *rockchip = dev_get_drvdata(dev);
int irq;
irq = of_irq_get_byname(dev->of_node, "legacy");
if (irq < 0)
return;
/* Perform other cleanups as necessary */
/* clear up INTR staatus register */
rockchip_pcie_writel_apb(rockchip, 0xffffffff,
PCIE_CLIENT_INTR_STATUS_MISC);
if (rockchip->irq_domain) {
int virq, j;
for (j = 0; j < PCI_NUM_INTX; j++) {
virq = irq_find_mapping(rockchip->irq_domain, j);
if (virq > 0)
irq_dispose_mapping(virq);
}
irq_set_chained_handler_and_data(irq, NULL, NULL);
irq_domain_remove(rockchip->irq_domain);
}
clk_bulk_disable_unprepare(rockchip->clk_cnt, rockchip->clks);
/* poweroff the phy */
rockchip_pcie_phy_deinit(rockchip);
/* release the reset */
release? Or "reset the controller"?
reset_control_assert(rockchip->rst);> > I am also looking into adding NOIRQ_SYSTEM_SLEEP_PM_OPS
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
pm_runtime_no_callbacks(dev);
}
Another thin I noticed is should we call pm_runtime_* here for hope thatI could not find 'genpd' (power domain) used in the PCIe driver
genpd could be powered donw once removed?
If we have an example to use genpd I will update this.
That sounds good, you can pick up my patch[1] if you'd like to continue
addressing the comments that I haven't had time to think more.
[1] https://www.spinics.net/lists/linux-pci/msg171846.html
Thanks
-Anand