Re: [PATCH v5 0/3] Add Radxa CM5 module and IO board dts
From: FUKAUMI Naoki
Date: Tue Oct 28 2025 - 08:25:32 EST
Hi Joseph,
I apologize for the delay in my work. My part is almost complete (see below), but would you like to take over the rest?
https://github.com/RadxaNaoki/linux/commits/radxa-cm5-io/
Best regards,
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 10/16/25 10:49, FUKAUMI Naoki wrote:
Hi Joseph,
On 10/16/25 08:39, Joseph Kogut wrote:
Hello Naoki,
On Wed, Sep 3, 2025 at 1:28 AM FUKAUMI Naoki <naoki@xxxxxxxxx> wrote:
Hi Joseph,
I'm thinking of continuing your work, so if you've already done
something, please let me know.
I've not followed up on this series yet, but I'm planning on picking
it back up this week. I'm happy to collaborate with you, do let me
know if you've made any progress or improvements, and thank you for
your review earlier.
I've already almost finished the work. Unfortunately, a problem(*1) caused the work to stop for a few weeks, but the problem has been resolved(*2), so I can continue working. I'll post a patch soon once some minor tweaking and testing is complete.
By the way, at some point I switched from "continuing your work" to "recreating a new one based on my current work." The results of my current work(*3) have changed significantly.
*1 https://patchwork.kernel.org/project/linux-pci/patch/20250922-pci-dt- aspm-v2-1-2a65cf84e326@xxxxxxxxxxxxxxxx/#26603499
*2 https://patchwork.kernel.org/project/linux-rockchip/ patch/20251015123142.392274-2-cassel@xxxxxxxxxx/
*3 https://github.com/RadxaNaoki/u-boot/commits/radxa-cm5-io/
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
Best,
Joseph
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 6/18/25 07:11, Joseph Kogut wrote:
This patch series adds initial device tree support for the Radxa CM5 SoM
and accompanying IO board.
V4 -> V5:
Patch (2/3), per Jimmy:
- Alias eMMC to mmc0
- Remove unused sdio alias
- Move gmac, hdmi0 nodes to carrier board dts
Patch (3/3), per Jimmy:
- Enable hdmi0_sound and i2s5_8ch
- Remove redundant enablement of sdhci
- Enable usb_host2_xhci
- Tested HDMI audio
V3 -> V4:
- Fixed XHCI initialization bug by changing try-power-role from source
to sink
V2 -> V3:
- Addressed YAML syntax error in dt binding (per Rob)
- Fixed whitespace issue in dts reported by checkpatch.pl
- Split base SoM and carrier board into separate patches
- Added further details about the SoM and carrier to the commit
messages
V1 -> V2:
- Added copyright header and data sheet links
- Removed non-existent property
- Sorted alphabetically
- Removed errant whitespace
- Moved status to the end of each node
- Removed pinctrl-names property from leds (indicated by CHECK_DTBS)
- Removed delays from gmac with internal delay
- Link to v4: https://lore.kernel.org/r/20250605-rk3588s-cm5-io-dts- upstream-v4-0-8445db5ca6b0@xxxxxxxxx
Signed-off-by: Joseph Kogut <joseph.kogut@xxxxxxxxx>
---
Joseph Kogut (3):
dt-bindings: arm: rockchip: Add Radxa CM5 IO board
arm64: dts: rockchip: Add rk3588 based Radxa CM5
arm64: dts: rockchip: Add support for CM5 IO carrier
.../devicetree/bindings/arm/rockchip.yaml | 7 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3588s-radxa-cm5-io.dts | 486 ++++++++ +++++++++++++
.../arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi | 135 ++++++
4 files changed, 629 insertions(+)
---
base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8
change-id: 20250605-rk3588s-cm5-io-dts-upstream-f4d1e853977e
Best regards,