[PATCH v1 2/3] arm64: dts: colibri-imx8x: Add wi-fi 32kHz clock

[max . oss . 09]

From: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>

The Wi-Fi module requires a 32kHz clock to support Wi-Fi/BT low power
operation.
Setting the pinmuxing option on the connected pin to 32kHz is all
needed to generated the signal.

Signed-off-by: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>
---

 arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index 318fe4db1b64..32bca4c6f37e 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -490,7 +490,7 @@ &mu1_m0 {
 /* On-module PCIe for Wi-Fi */
 &pcieb {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-0 = <&pinctrl_pcieb>, <&pinctrl_wifi>;
 	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
 	phy-names = "pcie-phy";
 	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
-- 
2.42.0