Re: [PATCH v11 1/3] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Krishna Kurapati PSSNV]

On 11/3/2025 8:40 PM, Akhil P Oommen wrote:
> On 11/2/2025 9:23 PM, Bjorn Andersson wrote:
> > On Sun, Nov 02, 2025 at 12:43:07AM +0530, Akhil P Oommen wrote:
> > > On 11/1/2025 11:14 PM, Krishna Kurapati wrote:
> > > > From: Wesley Cheng <wesley.cheng@xxxxxxxxxxxxxxxx>
> > > > diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> > [..]
> > > > +			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> > > > +			required-opps = <&rpmhpd_opp_nom>;
> > >
> > > Probably I am missing something, but which power domain associated to a
> > > rail is scaled to NOM corner here?
> >
> > That would be the parent of the GCC_USB30_PRIM_GDSC, which should be the
> > CX rail. We currently have a NOM requirement here just in case we're
> > going to operate a SuperSpeed link, and the driver doesn't scale.
>
> This is a bit concerning. There are other subsystems which share CX
> rail, including GPU. So a hw spec violation on USB may impact these
> subsystems which would be pretty hard to root cause to USB.
>
> @Krishna, do you plan to fix this with a follow up patch?
>
> > That said, your question is very much valid, because on SM8750 GCC
> > doesn't specify CX as a power-domain of &gcc, this vote goes into the
> > void.
>
> So the fix is to just add the VDD_CX power domain to the gcc node and a
> gcc driver change to enable "use_rpm" flag?

Will check with the team internally and post a patch.

Regards,
Krishna,