Re: [PATCH 07/20] arm64: dts: qcom: kaanapali: Add remoteprocs for Kaanapali SoC
From: Kumari Pallavi
Date: Tue Nov 04 2025 - 05:06:20 EST
On 11/4/2025 2:29 PM, Jingyi Wang wrote:
On 10/1/2025 1:24 AM, Alexey Klimov wrote:
On Thu Sep 25, 2025 at 1:17 AM BST, Jingyi Wang wrote:
Add remoteproc PAS loader for ADSP, CDSP, MPSS and SoCCP with
its SMP2P and fastrpc nodes.
Written with help from Kumari Pallavi(added fastrpc).
Co-developed-by tag then maybe?
Also I don't see this name in email addresses.
Hi Alexey,
We got review comments to merge dt changes in one patch, we are still discussing on
how to organize next version, I think we can add the Co-developed-by tag if remoteproc
is sent as a single patch in next version, "Written with" description will be used
to avoid SOB chain too long.
Thanks,
Jingyi
Signed-off-by: Jingyi Wang <jingyi.wang@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/kaanapali.dtsi | 484 ++++++++++++++++++++++++++++++++
1 file changed, 484 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
index 08ab267bf9a7..c3b38fd851c5 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
@@ -438,6 +438,121 @@ rmtfs_mem: rmtfs@d7c00000 {
};
};
[...]
+ remoteproc_adsp: remoteproc@6800000 {
+ compatible = "qcom,kaanapali-adsp-pas", "qcom,sm8550-adsp-pas";
+ reg = <0x0 0x06800000 0x0 0x10000>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx",
+ "lmx";
+
+ memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_MPROC_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_MPROC_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ qcom,remote-pid = <2>;
+
+ label = "lpass";
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+
+ iommus = <&apps_smmu 0x1003 0x80>,
+ <&apps_smmu 0x1043 0x20>;
+ dma-coherent;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+
+ iommus = <&apps_smmu 0x1004 0x80>,
+ <&apps_smmu 0x1044 0x20>;
+ dma-coherent;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+
+ iommus = <&apps_smmu 0x1005 0x80>,
+ <&apps_smmu 0x1045 0x20>;
+ dma-coherent;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+
+ iommus = <&apps_smmu 0x1006 0x80>,
+ <&apps_smmu 0x1046 0x20>;
+ dma-coherent;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+
+ iommus = <&apps_smmu 0x1007 0x40>,
+ <&apps_smmu 0x1067 0x0>,
+ <&apps_smmu 0x1087 0x0>;
+ dma-coherent;
+ };
+ };
+ };
+ };
Fastrpc nodes here. Was this tested? If yes, then how?
Or was it just copied from somewhere from downstream?
The same questions basically go for cdsp fastrpc too.
+Kumari, could you please comment on this?
I verified the CDSP and ADSP nodes by running the tests available at
https://github.com/qualcomm/fastrpc/tree/development/test. Upon
successful execution, the message "All tests completed successfully" is
displayed.
[..]
+ label = "cdsp";
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x19c1 0x0>,
+ <&apps_smmu 0x1961 0x0>,
+ <&apps_smmu 0x0c21 0x0>,
+ <&apps_smmu 0x0c01 0x40>;
+ dma-coherent;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x1962 0x0>,
+ <&apps_smmu 0x0c02 0x20>,
+ <&apps_smmu 0x0c42 0x0>,
+ <&apps_smmu 0x19c2 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1963 0x0>,
+ <&apps_smmu 0x0c23 0x0>,
+ <&apps_smmu 0x0c03 0x40>,
+ <&apps_smmu 0x19c3 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1964 0x0>,
+ <&apps_smmu 0x0c44 0x0>,
+ <&apps_smmu 0x0c04 0x20>,
+ <&apps_smmu 0x19c4 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1965 0x0>,
+ <&apps_smmu 0x0c45 0x0>,
+ <&apps_smmu 0x0c05 0x20>,
+ <&apps_smmu 0x19c5 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x1966 0x0>,
+ <&apps_smmu 0x0c06 0x20>,
+ <&apps_smmu 0x0c46 0x0>,
+ <&apps_smmu 0x19c6 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x1967 0x0>,
+ <&apps_smmu 0x0c27 0x0>,
+ <&apps_smmu 0x0c07 0x40>,
+ <&apps_smmu 0x19c7 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x1968 0x0>,
+ <&apps_smmu 0x0c08 0x20>,
+ <&apps_smmu 0x0c48 0x0>,
+ <&apps_smmu 0x19c8 0x0>;
+ dma-coherent;
+ };
+
+ /* note: secure cb9 in downstream */
+
+ compute-cb@12 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <12>;
+ iommus = <&apps_smmu 0x196c 0x0>,
+ <&apps_smmu 0x0c2c 0x00>,
+ <&apps_smmu 0x0c0c 0x40>,
+ <&apps_smmu 0x19cc 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@13 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <13>;
+ iommus = <&apps_smmu 0x196d 0x0>,
+ <&apps_smmu 0x0c0d 0x40>,
+ <&apps_smmu 0x0c2e 0x0>,
+ <&apps_smmu 0x0c2d 0x0>,
+ <&apps_smmu 0x19cd 0x0>;
+ dma-coherent;
+ };
+ };
+ };
+ };
+
Best regards,
Alexey
Thanks,
Pallavi