Re: [PATCH 3/4] usb: host: ohci-platform: Call reset assert/deassert on suspend/resume

[Geert Uytterhoeven]

Hi Claudiu,

On Thu, 6 Nov 2025 at 15:36, Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> The Renesas RZ/G3S SoC supports a power-saving mode in which power to most
> of the SoC components is turned off, including the USB blocks. On the
> resume path, the reset signal must be de-asserted before applying any
> settings to the USB registers. To handle this properly, call
> reset_control_assert() and reset_control_deassert() during suspend and
> resume, respectively.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -280,6 +281,14 @@ static int ohci_platform_suspend(struct device *dev)
>         if (pdata->power_suspend)
>                 pdata->power_suspend(pdev);
>
> +       ret = reset_control_assert(priv->resets);
> +       if (ret) {
> +               if (pdata->power_on)
> +                       pdata->power_on(pdev);
> +
> +               ohci_resume(hcd, false);

Same comment as previous patch: if the reset_control_assert() failed,
what are the chances that the device will actually work after trying
to bring it up again?

> +       }
> +
>         return ret;
>  }
>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds