Re: [PATCH v2 6/7] arm64: dts: qcom: Add device tree for TUXEDO Elite 14 Gen1
From: Maud Spierings
Date: Thu Nov 06 2025 - 02:04:05 EST
Hello Georg,
Great to see another version of this land!
Initial support for TUXEDO Elite 14 Gen1 based on Qualcomm Snapdragon X
Elite SoC (X1E78100).
Working:
* Touchpad
* Keyboard
* eDP (no brightness control yet)
* NVMe
* USB Type-C port
* USB-C DP altmode
* HDMI-A port
* WiFi (WiFi 7 untested)
* Bluetooth
* GPU
* Video decoding
* USB Type-A
* Audio, speakers, microphones
- 4x speakers.
- 4x dmic
- headset
* Camera
* Fingerprint reader
Signed-off-by: Georg Gottleuber <ggo@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Srinivas Kandagatla <srini@xxxxxxxxxx>
Signed-off-by: Ettore Chimenti <ettore.chimenti@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../qcom/x1e80100-tuxedo-elite-14-gen1.dts | 1486 +++++++++++++++++
2 files changed, 1488 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-tuxedo-elite-14-gen1.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 296688f7cb26..598bf4c6e84a 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -350,3 +350,5 @@ x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1p42100-hp-omnibook-x14.dtb x1p42100-hp-omnibook-x14-el2.dtb
x1p42100-lenovo-thinkbook-16-el2-dtbs := x1p42100-lenovo-thinkbook-16.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1p42100-lenovo-thinkbook-16.dtb x1p42100-lenovo-thinkbook-16-el2.dtb
+x1e80100-tuxedo-elite-14-gen1-el2-dtbs := x1e80100-tuxedo-elite-14-gen1.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += x1e80100-tuxedo-elite-14-gen1.dtb
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-tuxedo-elite-14-gen1.dts b/arch/arm64/boot/dts/qcom/x1e80100-tuxedo-elite-14-gen1.dts
new file mode 100644
index 000000000000..0bfe5931434e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-tuxedo-elite-14-gen1.dts
@@ -0,0 +1,1486 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 TUXEDO Computers GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+ model = "TUXEDO Elite 14 Gen1";
+ compatible = "tuxedo,elite14gen1", "qcom,x1e80100";
+
+ aliases {
+ serial0 = &uart21;
+ serial1 = &uart14;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9385-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-names = "default";
+
+ switch-lid {
+ gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ };
+ };
+
+ hdmi-bridge {
+ compatible = "asl,cs5263";
+
+ pinctrl-0 = <&hdmi_hpd_default>;
+ pinctrl-names = "default";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_bridge_dp_in: endpoint {
+ remote-endpoint = <&usb_1_ss2_qmpphy_out_dp>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi_bridge_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&hdmi_bridge_tmds_out>;
+ };
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&retimer_ss0_ss_out>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss0_con_sbu_out>;
+ };
+ };
+ };
+ };
+ };
Have you seen the new charge limit properties? Might be a nice thing to check out for a next version, see [1].
Link: https://lore.kernel.org/all/20250919-qcom_battmgr_update_new-v6-1-ed5c38867614@xxxxxxxxxxxxxxxx/ [1]
Kind regards,
Maud