[PATCH 1/2] dt-bindings: iio: accel: adxl380: add new supported parts

[Jonathan Santos]

Include ADXL318 and ADXL319 accelerometers to the documentation.
The ADXL318 is based on the ADXL380, while the ADXL319 is based on the
ADXL382. However, the ADXL318/319 do not support some built-in features
like single tap, double tap and triple tap detection, and also activity
and inactivity detection.

Signed-off-by: Jonathan Santos <Jonathan.Santos@xxxxxxxxxx>
---
 .../devicetree/bindings/iio/accel/adi,adxl380.yaml    | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml
index f1ff5ff4f478..f38f384dd818 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml
@@ -11,18 +11,21 @@ maintainers:
   - Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
 
 description: |
-  The ADXL380/ADXL382 is a low noise density, low power, 3-axis
-  accelerometer with selectable measurement ranges. The ADXL380
-  supports the ±4 g, ±8 g, and ±16 g ranges, and the ADXL382 supports
-  ±15 g, ±30 g, and ±60 g ranges.
+  The ADXL380/ADXL382 and ADXL318/ADXL319 are low noise density,
+  low power, 3-axis accelerometers with selectable measurement ranges.
+  The ADXL380 and ADXL318 support the ±4 g, ±8 g, and ±16 g ranges,
+  while the ADXL382 and ADXL319 support ±15 g, ±30 g, and ±60 g ranges.
 
   https://www.analog.com/en/products/adxl380.html
+  https://www.analog.com/en/products/adxl318.html
 
 properties:
   compatible:
     enum:
       - adi,adxl380
       - adi,adxl382
+      - adi,adxl318
+      - adi,adxl319
 
   reg:
     maxItems: 1

base-commit: 70437bbd7529e9860fb7f0c92a89e0e6abaa994e
-- 
2.34.1