Re: [PATCH v3 05/16] dt-bindings: mfd: ROHM BD72720

[Rob Herring (Arm)]

On Wed, 05 Nov 2025 09:37:05 +0200, Matti Vaittinen wrote:
> From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
> 
> The ROHM BD72720 is a power management IC integrating regulators, GPIOs,
> charger, LEDs, RTC and a clock gate.
> 
> Add dt-binding doc for ROHM BD72720.
> 
> Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
> 
> ---
> Revision history:
>  v2 => v3:
>  - Styling
>  - Document all pin functions
>  - use pattern-properties
>  - re-use existing Rsense binding
>  - correct the example
> 
>  RFCv1 => v2:
>  - Typofixes
> ---
>  .../bindings/mfd/rohm,bd72720-pmic.yaml       | 273 ++++++++++++++++++
>  1 file changed, 273 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml: Unresolvable reference: /schemas/regulator/rohm,bd77270-regulator.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.example.dtb: pmic@4b (rohm,bd71828): 'rohm,pin-dvs0', 'rohm,pin-dvs1', 'rohm,pin-exten0', 'rohm,pin-exten1', 'rohm,pin-fault_b' do not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/4c7ea0c83f4bb4af65439a9b8951d50ee705d22c.1762327887.git.mazziesaccount@xxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.