[PATCH 2/2] arm64: dts: rockchip: Move otg-port to controller on rk3566-pinenote

[Diederik de Haas]

The 'rockchip,inno-usb2phy' binding's otg-port node does not have a port
node, so the current definition causes this DT validation issue:

  usb2phy@fe8a0000 (rockchip,rk3568-usb2phy): otg-port:
    'port' does not match any of the regexes: '^pinctrl-[0-9]+$'

Its purpose was to define the other endpoint for the USB-C connector
port. The 'snps,dwc3-common.yaml' DT binding does have a port node to
connect the dwc3 to type C connector with the 'usb-role-switch'
property. Therefore move the port node to the dwc3 node and add the
'usb-role-switch' property to it.
This fixes the above mention DT validation issue.

The incorrect definition also caused these kernel errors:

  rockchip-usb2phy fe8a0000.usb2phy: Failed to create device link (0x180) with supplier port0 for /usb2phy@fe8a0000/otg-port
  rockchip-usb2phy fe8a0000.usb2phy: Failed to create device link (0x180) with supplier 3-0060 for /usb2phy@fe8a0000/otg-port

With the changed definition, those errors are now also gone.

While at it, remove the 'dr_mode' property as that's already defined in
rk356x-base.dtsi and there's no point in redefining it.

Fixes: 87a267b4af09 ("arm64: dts: rockchip: Add USB and TCPC to rk3566-pinenote")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Diederik de Haas <diederik@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index 7c65fe4900be..be8076a8e30c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -694,8 +694,14 @@ &uart2 {
 };
 
 &usb_host0_xhci {
-	dr_mode = "otg";
+	usb-role-switch;
 	status = "okay";
+
+	port {
+		usb2phy0_typec_hs: endpoint {
+			remote-endpoint = <&typec_hs_usb2phy0>;
+		};
+	};
 };
 
 &usb2phy0 {
@@ -704,10 +710,4 @@ &usb2phy0 {
 
 &usb2phy0_otg {
 	status = "okay";
-
-	port {
-		usb2phy0_typec_hs: endpoint {
-			remote-endpoint = <&typec_hs_usb2phy0>;
-		};
-	};
 };

-- 
2.51.0