[PATCH 7/8] USB: serial: ftdi_sio: clean up NDI speed hack

[Johan Hovold]

NDI devices remap the 19200 line speed to 1.2 Mbps.

Use the quirk pointer from the match table to enable the quirk instead
of comparing PIDs on every speed change.

Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
 drivers/usb/serial/ftdi_sio.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f5786689697c..26f1260ff995 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1247,6 +1247,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 static u32 get_ftdi_divisor(struct tty_struct *tty,
 						struct usb_serial_port *port)
 {
+	const struct ftdi_quirk *quirk = usb_get_serial_data(port->serial);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct device *dev = &port->dev;
 	u32 div_value = 0;
@@ -1306,17 +1307,8 @@ static u32 get_ftdi_divisor(struct tty_struct *tty,
 	case FT232R:
 	case FTX:
 		if (baud <= 3000000) {
-			u16 product_id = le16_to_cpu(
-				port->serial->dev->descriptor.idProduct);
-			if (((product_id == FTDI_NDI_HUC_PID)		||
-			     (product_id == FTDI_NDI_SPECTRA_SCU_PID)	||
-			     (product_id == FTDI_NDI_FUTURE_2_PID)	||
-			     (product_id == FTDI_NDI_FUTURE_3_PID)	||
-			     (product_id == FTDI_NDI_AURORA_SCU_PID)	||
-			     (product_id == FTDI_NDI_EMGUIDE_GEMINI_PID)) &&
-			    (baud == 19200)) {
+			if (quirk == &ftdi_ndi_quirk && baud == 19200)
 				baud = 1200000;
-			}
 			div_value = ftdi_232bm_baud_to_divisor(baud);
 		} else {
 			dev_dbg(dev, "%s - Baud rate too high!\n", __func__);
-- 
2.51.0