[PATCH 2/2] PCI: AtomicOps: Fix logic in enable function

[Gerd Bayer]

Move the check for root port requirements past the loop within
pci_enable_atomic_ops_to_root() that checks on potential switch
(up- and downstream) ports.

Inside the loop traversing the PCI tree upwards, prepend the switch case
to validate the routing capability on any port with a fallthrough-case
that does the additional check for Atomic Ops not being blocked on
upstream ports.

Do not enable Atomic Op Requests if nothing can be learned about how the
device is attached - e.g. if it is on an "isolated" bus, as in s390.

Reported-by: Alexander Schmidt <alexs@xxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 430a23689dea ("PCI: Add pci_enable_atomic_ops_to_root()")
Signed-off-by: Gerd Bayer <gbayer@xxxxxxxxxxxxx>
---
 drivers/pci/pci.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 597bf419c3a6867f8df7ebdc14fc8ca47d0958a6..9a188fe8639d8a3d05e73e65114ce241d0f88bbf 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3823,7 +3823,7 @@ int pci_rebar_set_size(struct pci_dev *pdev, int bar, int size)
 int pci_enable_atomic_ops_to_root(struct pci_dev *dev, u32 cap_mask)
 {
 	struct pci_bus *bus = dev->bus;
-	struct pci_dev *bridge;
+	struct pci_dev *bridge = NULL;
 	u32 cap, ctl2;
 
 	/*
@@ -3861,29 +3861,27 @@ int pci_enable_atomic_ops_to_root(struct pci_dev *dev, u32 cap_mask)
 		switch (pci_pcie_type(bridge)) {
 		/* Ensure switch ports support AtomicOp routing */
 		case PCI_EXP_TYPE_UPSTREAM:
-		case PCI_EXP_TYPE_DOWNSTREAM:
-			if (!(cap & PCI_EXP_DEVCAP2_ATOMIC_ROUTE))
-				return -EINVAL;
-			break;
-
-		/* Ensure root port supports all the sizes we care about */
-		case PCI_EXP_TYPE_ROOT_PORT:
-			if ((cap & cap_mask) != cap_mask)
-				return -EINVAL;
-			break;
-		}
-
-		/* Ensure upstream ports don't block AtomicOps on egress */
-		if (pci_pcie_type(bridge) == PCI_EXP_TYPE_UPSTREAM) {
+			/* Upstream ports must not block AtomicOps on egress */
 			pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2,
 						   &ctl2);
 			if (ctl2 & PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK)
 				return -EINVAL;
+			fallthrough;
+		/* All switch ports need to route AtomicOps */
+		case PCI_EXP_TYPE_DOWNSTREAM:
+			if (!(cap & PCI_EXP_DEVCAP2_ATOMIC_ROUTE))
+				return -EINVAL;
+			break;
 		}
-
 		bus = bus->parent;
 	}
 
+	/* Finally, last bridge must be root port and support requested sizes */
+	if ((!bridge) ||
+	    (pci_pcie_type(bridge) != PCI_EXP_TYPE_ROOT_PORT) ||
+	    ((cap & cap_mask) != cap_mask))
+		return -EINVAL;
+
 	pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
 				 PCI_EXP_DEVCTL2_ATOMIC_REQ);
 	return 0;

-- 
2.48.1