Re: [PATCH] usb: usb-storage: No additional quirks need to be added to the ECD819-SU3 optical drive.

[Alan Swanson]

On Fri, 2025-11-07 at 10:49 -0500, Alan Stern wrote:
> On Fri, Nov 07, 2025 at 02:10:46PM +0800, ccc194101@xxxxxxx wrote:
> > From: Chen Changcheng <chenchangcheng@xxxxxxxxxx>
> > 
> > The optical drive of ECD819-SU3 has the same vid and pid as INIC-
> > 3069,
> > as follows:
> > T:  Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
> > D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
> > P:  Vendor=13fd ProdID=3940 Rev= 3.10
> > S:  Manufacturer=HL-DT-ST
> > S:  Product= DVD+-RW GT80N
> > S:  SerialNumber=423349524E4E38303338323439202020
> > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=144mA
> > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=02 Prot=50 Driver=usb-
> > storage
> > E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> > E:  Ad=0a(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> > 
> > This will result in the optical drive device also adding
> > the quirks of US_FL_NO_ATA_1X. When performing an erase operation,
> > it will fail, and the reason for the failure is as follows:
> > [  388.967742] sr 5:0:0:0: [sr0] tag#0 Send: scmd
> > 0x00000000d20c33a7
> > [  388.967742] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass
> > through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
> > [  388.967773] sr 5:0:0:0: [sr0] tag#0 Done: SUCCESS Result:
> > hostbyte=DID_TARGET_FAILURE driverbyte=DRIVER_OK cmd_age=0s
> > [  388.967773] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass
> > through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
> > [  388.967803] sr 5:0:0:0: [sr0] tag#0 Sense Key : Illegal Request
> > [current]
> > [  388.967803] sr 5:0:0:0: [sr0] tag#0 Add. Sense: Invalid field in
> > cdb
> > [  388.967803] sr 5:0:0:0: [sr0] tag#0 scsi host busy 1 failed 0
> > [  388.967803] sr 5:0:0:0: Notifying upper driver of completion
> > (result 8100002)
> > [  388.967834] sr 5:0:0:0: [sr0] tag#0 0 sectors total, 0 bytes
> > done.
> > 
> > Signed-off-by: Chen Changcheng <chenchangcheng@xxxxxxxxxx>
> > ---
> >  drivers/usb/storage/unusual_uas.h | 6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/drivers/usb/storage/unusual_uas.h
> > b/drivers/usb/storage/unusual_uas.h
> > index 1477e31d7763..6d32b787bff8 100644
> > --- a/drivers/usb/storage/unusual_uas.h
> > +++ b/drivers/usb/storage/unusual_uas.h
> > @@ -97,6 +97,12 @@ UNUSUAL_DEV(0x125f, 0xa94a, 0x0160, 0x0160,
> >  		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> >  		US_FL_NO_ATA_1X),
> >  
> > +UNUSUAL_DEV(0x13fd, 0x3940, 0x0310, 0x0310,
> > +		"Initio Corporation",
> > +		"external DVD burner ECD819-SU3",
> > +		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> > +		NULL),
> > +
> >  /* Reported-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
> > */
> >  UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
> >  		"Initio Corporation",
> 
> It's unprecedented to have two quirks with the same VID and PID,
> where 
> the second augments the first by virtue of its wider range of
> bcdDevice 
> values.
> 
> As explained in commit 89f23d51defc ("uas: Add US_FL_IGNORE_RESIDUE
> for 
> Initio Corporation INIC-3069"), the original Initio Corporation 
> quirk in unusual_uas.h was added as a copy of the corresponding quirk
> in 
> unusual_devs.h, which applies only to bcdDevice = 0x0209.  Should we 
> simply limit the existing unusual_uas.h quirk in the same way?
> 
> Benjamin and Alan, you two appear to be the people who originally
> reported the need for this uas quirk.  Do you have any objection to 
> changing the bcdDevice range from 0x0000 - 0x9999 to 0x0209 -
> 0x0209?  
> Or can you suggest a range that does not include 0x0310?

Can only provide lsusb details for my device. Still need the residue
flag for use with MakeMKV.

Bus 002 Device 002: ID 13fd:3940 Initio Corporation external DVD burner
ECD819-SU3
Negotiated speed: SuperSpeed (5Gbps)
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0 [unknown]
  bDeviceSubClass         0 [unknown]
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x13fd Initio Corporation
  idProduct          0x3940 external DVD burner ECD819-SU3
  bcdDevice            3.09
  iManufacturer           1 Optiarc
  iProduct                2 BD ROM BC-5500H
  iSerial                 3 20202020202020202020202020202020
  bNumConfigurations      1

-- 
Alan.