Re: [PATCH v3] arm64: dts: qcom: hamoa-iot-evk: enable pwm rg leds

[Dmitry Baryshkov]

On Fri, Nov 14, 2025 at 12:13:03AM -0800, Tingguo Cheng wrote:
> From: Tingguo Cheng <tingguo.cheng@xxxxxxxxxxxxxxxx>
> 
> Add RED and GREEN LED channels for the RGB device connected to PMC8380C
> PWM-LED pins. Omit BLUE channel to match default hardware setup where
> it's tied to EDL indicator.
> 
> Signed-off-by: Tingguo Cheng <tingguo.cheng@xxxxxxxxxxxxxxxx>
> ---
> Changes in v3:
> - Rebased on next-20251113.
> - Validated the function based on the patch "[PATCH] leds: rgb: leds-qcom-lpg: Allow LED_COLOR_ID_MULTI".
> - Link to v2: https://lore.kernel.org/r/20251030-add-rgb-led-for-hamoa-iot-evk-v2-1-3b3326784d7b@xxxxxxxxxxxxxxxx
> 
> Changes in v2:
> - Rebased on next-20251030.
> - Remove BLUE led channel to align with the default hardware configuration.
> - Link to v1: https://lore.kernel.org/r/20251017-add-rgb-led-for-hamoa-iot-evk-v1-1-6df8c109da57@xxxxxxxxxxxxxxxx
> ---
>  arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 

Commit subject: PWM, RG, LEDs.

-- 
With best wishes
Dmitry