Re: [PATCH 4/4] usb: dwc3: add support for configurable DMA addressable bits

[Thinh Nguyen]

On Tue, Nov 11, 2025, adrianhoyin.ng@xxxxxxxxxx wrote:
> From: Adrian Ng Ho Yin <adrianhoyin.ng@xxxxxxxxxx>
> 
> Add support for configuring the DMA addressable bit width in the
> Synopsys DesignWare USB3 (DWC3) core driver.
> 
> Altera Agilex5 supports only 40-bit DMA addressing. Setting an incorrect
> DMA mask (such as the default 64-bit) can lead to address truncation or
> translation faults when the SMMU is enabled.
> 
> This commit introduces a new field, dma_addressable_bits, in the dwc3
> structure to track the platform’s supported DMA width. The default value
> is set to 64 bits, but for Agilex5 platforms (altr,agilex5-dwc3), the
> value is overridden to 40 bits. This field is then used when setting the
> DMA mask to ensure compatibility with the system’s actual address bus
> capabilities.
> 
> Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@xxxxxxxxxx>
> ---
>  drivers/usb/dwc3/core.c | 9 ++++++++-
>  drivers/usb/dwc3/core.h | 3 +++
>  2 files changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index ae140c356295..20e655364135 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -2179,6 +2179,9 @@ int dwc3_core_probe(const struct dwc3_probe_data *data)
>  	dwc->xhci_resources[0].flags = res->flags;
>  	dwc->xhci_resources[0].name = res->name;
>  
> +	/* Initialize dma addressable bit to 64 bits as default */
> +	dwc->dma_addressable_bits = 64;

This should be a dwc3 property that can be passed by the glue.

> +
>  	/*
>  	 * Request memory region but exclude xHCI regs,
>  	 * since it will be requested by the xhci-plat driver.
> @@ -2194,6 +2197,9 @@ int dwc3_core_probe(const struct dwc3_probe_data *data)
>  			dwc_res.start += DWC3_RTK_RTD_GLOBALS_REGS_START;
>  		}
>  
> +		if (of_device_is_compatible(parent, "altr,agilex5-dwc3"))

Avoid of_device_is_compatible() in the core. Do this in the glue.

> +			dwc->dma_addressable_bits = 40;
> +
>  		of_node_put(parent);
>  	}
>  
> @@ -2243,7 +2249,8 @@ int dwc3_core_probe(const struct dwc3_probe_data *data)
>  
>  	if (!dwc->sysdev_is_parent &&
>  	    DWC3_GHWPARAMS0_AWIDTH(dwc->hwparams.hwparams0) == 64) {
> -		ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64));
> +		ret = dma_set_mask_and_coherent(dwc->sysdev,
> +						DMA_BIT_MASK(dwc->dma_addressable_bits));
>  		if (ret)
>  			goto err_disable_clks;
>  	}
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index a5fc92c4ffa3..ddc42c88da93 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1180,6 +1180,8 @@ struct dwc3_glue_ops {
>   * @wakeup_pending_funcs: Indicates whether any interface has requested for
>   *			 function wakeup in bitmap format where bit position
>   *			 represents interface_id.
> + * @dma_addressable_bits: set if we need to configure a different
> + *			dma-bit-mask other than 64 bits.
>   */
>  struct dwc3 {
>  	struct work_struct	drd_work;
> @@ -1414,6 +1416,7 @@ struct dwc3 {
>  	struct dentry		*debug_root;
>  	u32			gsbuscfg0_reqinfo;
>  	u32			wakeup_pending_funcs;
> +	u32			dma_addressable_bits;
>  };
>  
>  #define INCRX_BURST_MODE 0
> -- 
> 2.49.GIT
> 

BR,
Thinh