Re: [PATCH v4 03/20] regulator: dt-bindings: add s2mpg11-pmic regulators

[Krzysztof Kozlowski]

On 10/11/2025 20:28, André Draszik wrote:
> The S2MPG11 PMIC is a Power Management IC for mobile applications with
> buck converters, various LDOs, power meters, NTC thermistor inputs, and
> additional GPIO interfaces. It typically complements an S2MPG10 PMIC in
> a main/sub configuration as the sub-PMIC.
> 
> S2MPG11 has 12 buck, 1 buck-boost, and 15 LDO rails. Several of these
> can either be controlled via software (register writes) or via external
> signals, in particular by:
>     * one out of several input pins connected to a main processor's:
>         *  GPIO pins
>         * other pins that are e.g. firmware- or power-domain-controlled
>           without explicit driver intervention
>     * a combination of input pins and register writes.
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Best regards,
Krzysztof